We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass torch tip with threaded base and swirl flame design

TurboTorch

TurboTorch 0386-0115 S-6 Acetylene Swirl Flame Tip

SKU CH-8YZV-YVD34

Acetylene torch tip produces a soft swirl flame for brazing and soldering copper up to two inches

  • Soft swirl flame for precise brazing and soldering
  • Threaded connection fits WA-400 compatible torches
  • Operates at 5 to 15 psig fuel pressure
  • Brass construction resists corrosion and heat
  • Delivers 0.264 to 0.444 cmh fuel flow

TurboTorch S-6 Acetylene Swirl Tip

The TurboTorch S-6 is a brass acetylene torch tip designed for soft soldering and silver brazing tasks. It produces a soft swirl flame suitable for joining copper tube and fittings in plumbing and HVAC work. The tip threads onto compatible handles for professional trade use.

Soft Flame Limits at 5 to 15 psig

The tip operates between 5 and 15 psig with a fuel flow of 0.264 to 0.444 cmh. It handles soft solder from 1 in to 2 in and silver braze from 1/2 in to 1 in. Exceeding these pressure or size ranges will degrade flame quality and joint integrity.

Threaded Fit for WA-400 Handles

Installation requires threading the tip onto a TurboTorch WA-400 compatible handle until hand tight. Ignition uses an external lighter applied to the tip face. Cross threading or overtightening damages the brass threads; carbon buildup blocks the swirl ports if the tip is not cleaned after each job.

Highlights

  • Soft swirl flame for precise brazing and soldering
  • Threaded connection fits WA-400 compatible torches
  • Operates at 5 to 15 psig fuel pressure
  • Brass construction resists corrosion and heat
  • Delivers 0.264 to 0.444 cmh fuel flow

Specifications

BrandTURBOTORCH

Questions about this item

Should I pick the S-6 tip or a different size for my WA-400 torch?

The S-6 fits the WA-400 torch and handles soft solder from 1 to 2 inches and silver braze from 1/2 to 1 inch, so choose it when your joints fall in those ranges.

What does the 5 to 15 psig fuel pressure rating mean when I am brazing?

It sets the acetylene pressure window; at 5 psig you get the minimum flow of 0.264 cmh for lighter work, while 15 psig delivers the maximum 0.444 cmh for larger joints.

How does the threaded connection affect the way I attach this tip?

The tip screws onto the WA-400 torch with a standard threaded fitting, so you simply hand-tighten it — no quick-connect adapter or special tool is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.