THISS
THISS DC9071 12V 3.6Ah NiMH Battery 2 Pack
Two 12 V 3.6 Ah NiMH packs replace DW9071, DC9071 and DE9071 batteries in compatible DeWalt 12 V cordless tools
- TypeBatteries
- Voltage12v
- CordlessCordless
- Color/FinishBlack
- Item Count2 pack
- Battery TypeNi-Cad
- Extended runtime with 3.6Ah NiMH capacity
- Direct replacement for DEWALT 12V XRP battery packs
- Two-pack value keeps a spare always ready
- Fits over fifty listed DEWALT drill and driver models
- Five-year parts and labour coverage included
12 V 3.6 Ah NiMH Two-Pack
This two-pack supplies 12-volt nickel-metal hydride cells rated at 3.6 Ah each. They fit DEWALT 12 V XRP cordless tools and chargers listed in the compatibility chart. The chemistry replaces the original Ni-Cad packs with a higher-capacity alternative. Condition is new.
Capacity and Runtime
Each cell delivers 3.6 Ah, giving noticeably longer run-time than lower-rated packs on drills, drivers and lights. The NiMH chemistry holds charge well during intermittent use but will self-discharge faster than lithium-ion if left idle for weeks. Heavy continuous draw will still deplete the pack within the normal duty cycle.
Upgrade Path
The pack upgrades owners of DEWALT 12 V XRP tools that originally shipped with Ni-Cad batteries. It is not compatible with DEWALT 12 V lithium platforms or Univolt systems. Buyers needing lithium-ion runtime or faster recharge should look elsewhere.
Highlights
- Extended runtime with 3.6Ah NiMH capacity
- Direct replacement for DEWALT 12V XRP battery packs
- Two-pack value keeps a spare always ready
- Fits over fifty listed DEWALT drill and driver models
- Five-year parts and labour coverage included
Specifications
| Type | Batteries |
|---|---|
| Voltage | 12v |
| Cordless | Cordless |
| Color/Finish | Black |
| Item Count | 2 pack |
| Battery Type | Ni-Cad |
| Parts | 5 Years |
| Labor | 5 Years |
Questions about this item
Will these 12V 3.6Ah NiMH packs run my older DEWALT DW9071 drill without modification?
Yes, they are built as direct replacements for the DW9071, DC9071, DE9071 and other listed 12V XRP packs, so the original tool and charger recognise them normally.
How can I confirm the 3600mAh cells are delivering full capacity after the first charge?
Run the tool under a typical load until it stops; a healthy pack should sustain runtime close to the rated 3.6Ah before the low-voltage cutoff engages.
Does the twin-pack carton include a charger or only the two DC9071 batteries?
Only the two 12V NiMH batteries are supplied; a compatible DEWALT 12V charger must be provided separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



