THISS
THISS 4-pack 20V 4000mAh Li-Ion battery for Dewalt DCB2045
Four 20 V 4000 mAh lithium-ion batteries compatible with Dewalt 20 V MAX tools including DCD, DCF, DCG and DCS series
- TypeBatteries
- Voltage20v
- CordlessCordless
- Color/FinishYellow
- Item Count4 pack
- Battery TypeLithium Ion
- 4-pack powers multiple 20V MAX tools at once
- 4000 mAh cells extend runtime on every charge
- Li-Ion chemistry holds charge during storage
- Fits DCB2045, DCB2044 and many other Dewalt packs
- Supports DCD, DCF, DCG, DCS and DCH tool families
20 V 4000 mAh lithium-ion battery pack
This four-pack supplies 20 V lithium-ion cells rated at 4000 mAh each. They are built as direct replacements for Dewalt DCB2045 and a long list of 18 V and 20 V MAX battery codes. The yellow finish matches the Dewalt tool line.
Compatibility limited to Dewalt 20 V MAX platform
The batteries only work with Dewalt 20 V MAX cordless tools such as the DCD, DCF, DCG and DCS series drills, drivers, grinders and saws. They will not operate on other brands or on Dewalt 12 V or 60 V FlexVolt systems.
Replaces lower-capacity Dewalt packs
Users moving up from 1.5 Ah or 2.0 Ah original packs gain longer run-time per charge for the same tool weight. The jump is worthwhile when extended use between charges matters more than the added cost of higher-capacity cells.
Highlights
- 4-pack powers multiple 20V MAX tools at once
- 4000 mAh cells extend runtime on every charge
- Li-Ion chemistry holds charge during storage
- Fits DCB2045, DCB2044 and many other Dewalt packs
- Supports DCD, DCF, DCG, DCS and DCH tool families
Specifications
| Type | Batteries |
|---|---|
| Voltage | 20v |
| Cordless | Cordless |
| Color/Finish | Yellow |
| Item Count | 4 pack |
| Battery Type | Lithium Ion |
Questions about this item
Should I choose the 4-pack or buy single batteries for my 20V tools?
The 4-pack gives you four 4000mAh cells in one carton, so you can keep spares charged and swap them without downtime on any 20V MAX tool.
What does the 4000mAh rating actually deliver on a 20V MAX drill or saw?
At 20V nominal the pack stores roughly 80Wh, which typically runs a DCD780 drill through several hundred holes or a DCS391 saw through dozens of cuts per charge.
Does the DCB2045 interface limit current on high-draw tools like the DCF895 impact driver?
The battery uses the standard 20V MAX slide-on connection, so it supplies the same peak current the tool requests; no firmware cap is imposed by the pack itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



