We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel strip heater, thirty and a half inches long, surface mount with parallel terminals

Tempco

Tempco CSH01627 Strip Heater 30-1/2 in 120V 750W

SKU CH-M2W6-GSMEW

A 30-1/2 inch surface-mount strip heater delivering 750 W at 120 V with a 304 stainless steel sheath rated to 1200 °F

  • 120 V single-phase supply simplifies wiring
  • 750 W output with 8 W/sq in density gives even heat
  • 304 stainless-steel sheath withstands 1 200 °F
  • CSA, cURus and UL 499 listed for code compliance
  • Slotted 1/2 in by 5/16 in holes speed surface mounting

30-1/2 inch 120V 750W Strip Heater

The Tempco CSH01627 is a surface-mount strip heater built for industrial process heating up to 1,200 degrees Fahrenheit. It suits engineers and maintenance teams who need a 304 stainless steel sheath element for tanks, platens or air heating ducts.

8 W/sq in watt density CSA cURus rated

At 750 watts and 120 volts the element delivers an 8 W/sq in density that spreads heat evenly across the 304 stainless steel sheath. The design carries CSA, cURus and NRTL recognition under UL 499 and C22.2 No. 72 for compliant thermal performance.

Parallel terminals slotted mounting holes

Parallel 10-32 screw terminals simplify single-phase wiring while 1/2 by 5/16 inch slotted holes on 29-1/2 inch centres allow flexible alignment on irregular surfaces. No control hardware or thermostat is included with the heater.

Highlights

  • 120 V single-phase supply simplifies wiring
  • 750 W output with 8 W/sq in density gives even heat
  • 304 stainless-steel sheath withstands 1 200 °F
  • CSA, cURus and UL 499 listed for code compliance
  • Slotted 1/2 in by 5/16 in holes speed surface mounting

Specifications

BrandTEMPCO

Questions about this item

How do I mount the 30-1/2 in strip heater with the 29-1/2 in mounting dimension and 10-32 screws?

Align the 1/2 in by 5/16 in slotted holes with the 29-1/2 in mounting dimension, insert 10-32 screws through the slots, and tighten evenly to secure the sheath against the surface.

What maintenance does the 304 stainless steel sheath and 8 W/sq in watt density require over time?

Periodically inspect the sheath for scale buildup or corrosion, verify screw tightness, and clean deposits to maintain heat transfer at the rated watt density.

At what temperature does the 1,200 °F maximum sheath temperature limit operation under continuous 750 W load?

The sheath temperature must not exceed 1,200 °F; sustained 750 W input at 120 V will approach this limit if airflow or heat sinking is insufficient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.