We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal strip heater with parallel terminals and slotted mounting holes

Tempco

Tempco CSH01616 Strip Heater 26 3/4 in 700 W 240 V

SKU CH-CJYB-SA18T

A 26 3/4 inch strip heater delivering 700 watts at 240 volts with a 304 stainless steel sheath rated to 1200 degrees Fahrenheit

  • 240 V supply suits industrial power systems
  • 700 W output delivers 9 W per square inch
  • 304 stainless steel sheath resists corrosion up to 1,200 °F
  • 25 3/4 in mounting centres simplify surface installation
  • CSA cURus NRTL listing confirms safety compliance

Industrial Strip Heater 700 W 240 V

The Tempco CSH01616 is a 26 3/4 in surface-mount strip heater rated for 700 W at 240 V single phase. It suits industrial processes that need consistent sheath temperatures up to 1200 °F. The 304 stainless steel sheath and 9 W/sq in watt density fit drying, sealing or pre-heating tasks.

Thermal Performance

The heater reaches a maximum sheath temperature of 1200 °F while delivering 700 W across its length. Watt density of 9 W/sq in spreads heat evenly along the seamless stainless steel sheath. No moving parts mean silent operation and no airflow management is required.

Build And Mounting

The sheath uses seamless 304 stainless steel for corrosion resistance and durability. Mounting dimension is 25 3/4 in with slotted holes 1/2 in by 5/16 in for 10-32 screws. Parallel terminals simplify wiring. Standards include CSA, cURus and UL 499 under CCN KSOT2/8.

Highlights

  • 240 V supply suits industrial power systems
  • 700 W output delivers 9 W per square inch
  • 304 stainless steel sheath resists corrosion up to 1,200 °F
  • 25 3/4 in mounting centres simplify surface installation
  • CSA cURus NRTL listing confirms safety compliance

Specifications

BrandTEMPCO

Questions about this item

How do I mount the CSH01616 strip heater and what is the common alignment mistake?

Surface-mount the heater using the 25 3/4 in mounting dimension. The slotted holes are 1/2 in long by 5/16 in wide for 10-32 screws. The step often missed is aligning the slots parallel to the heater length so thermal expansion does not shear the screws.

What maintenance does the 304 stainless steel sheath need and when should the heater be replaced?

The seamless 304 stainless steel sheath requires no routine maintenance. Replace the unit if the sheath shows discolouration, pitting or deformation, or if resistance drift indicates the 700 W output at 240 V can no longer be maintained.

At what temperature does the CSH01616 hit its design limit during continuous operation?

The maximum sheath temperature is rated at 1 200 Degrees F. Sustained operation at or above this limit will degrade the sheath material and insulation resistance, so the process temperature must stay below that threshold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.