We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two silver hex-shank combination drill-tap bits in a pack

TEMO 3134 2pc M2 HSS 6-32 Combination Drill Tap Deburr Countersink Hex Bit

SKU CH-4SGJ-0ABD8 MPN 3134

Two-piece M2 HSS 6-32 combination bits drill, tap and deburr steel, copper, brass and aluminium in one operation

  • TypeAluminum,Brass,Copper,Steel
  • Size/Dimensions6.0 in x 2.6 in x 0.5 in
  • MaterialSteel
  • Compatibility/FitmentAluminum,Brass,Copper,Steel
  • Selling Unit2
  • Color/FinishSilver
  • Drill tap and deburr in one operation with M2 high speed steel
  • Tapered tap design prevents thread damage from over drilling
  • 135 degree self centering split point tip for accurate starts
  • One piece construction matches drill to tap size for 6-32 threads
  • 10 gauge 3.5 mm capacity works in steel copper brass aluminum

Two-Piece M2 HSS 6-32 Combination Bit Set

The TEMO 3134 set contains two hex-shank bits that drill, tap and deburr in a single pass. Each bit is made from M2 high-speed steel for use on steel, copper, brass and aluminum. The one-piece construction matches the drill diameter to the 6-32 tap size, while a 135-degree split-point tip self-centres on the workpiece. Designed for tradespeople and hobbyists who need fast, accurate threaded holes in thin sheet metal.

10-Gauge (3.5 mm) Drilling Capacity

The bits handle material up to 10 gauge, which is approximately 3.5 mm thick, making them suitable for typical automotive and fabrication sheet stock. A tapered tap profile prevents thread damage caused by over-drilling. The manufacturer recommends using cutting oil and clearing chips from the flutes to extend tool life. Reverse the drill after completing the tap to back the bit out cleanly.

Low-Heat Operation With Cutting Oil

M2 high-speed steel resists heat buildup when lubricated, so the bits stay sharp during repetitive drilling and tapping cycles. The compact 6.0 by 2.6 by 0.5 inch package keeps the bits protected between jobs. No external power or cooling system is required beyond standard drill motor output. Clean chips regularly to maintain cutting efficiency and reduce friction.

Highlights

  • Drill tap and deburr in one operation with M2 high speed steel
  • Tapered tap design prevents thread damage from over drilling
  • 135 degree self centering split point tip for accurate starts
  • One piece construction matches drill to tap size for 6-32 threads
  • 10 gauge 3.5 mm capacity works in steel copper brass aluminum

Specifications

BrandTEMO
Model3134
TypeAluminum,Brass,Copper,Steel
Size/Dimensions6.0 in x 2.6 in x 0.5 in
MaterialSteel
Compatibility/FitmentAluminum,Brass,Copper,Steel
Selling Unit2
Color/FinishSilver
Item Count12 pack
Part Number3134

Questions about this item

What does the 6-32 thread size mean when I use this bit in a drill?

The 6-32 designation indicates a number-6 screw with 32 threads per inch; this bit drills the correct clearance hole, taps the matching threads, and deburrs the edge in a single pass.

How does the 135-degree split-point tip affect drilling performance?

The 135-degree self-centering split point reduces walking on steel, copper, brass, and aluminium, letting the bit start accurately without a centre punch.

Will the 6.0-inch overall length fit my standard 1/4-inch hex impact driver?

Yes, the bit uses a standard 1/4-inch hex shank that seats securely in any 1/4-inch hex chuck or quick-change adapter, and the 6.0-inch length clears most workpieces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.