We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green desoldering braid on ESD-safe bobbin, 0.075 in wide, 10 ft spool

TechSpray

TechSpray No-Clean Green #3 Braid 0.075 in 10 ft

SKU CH-TP0M-2KGC5

Desoldering braid with no-clean flux, 0.075 in wide on a 10 ft ESD-safe spool

  • TypeGreen #3 Braid
  • Color/FinishGreen
  • No-clean flux leaves zero ionic residue
  • Braid #3 width 0.075 in for precise joints
  • 10 ft spool on ESD-safe bobbin
  • Meets IPC J-STD-004 and NASA NHB 5300 4 (34-1) standards
  • Lead-free and non-reactive for reliable rework

No-Clean Green #3 Braid

This desoldering braid uses a no-clean flux coating that leaves clear, non-reactive residue. It is suited for technicians who need reliable solder removal without a separate cleaning step. The lead-free construction meets strict environmental and safety standards for professional electronics work.

10 ft spool with 0.075 in width

The ten-foot length on an ESD-safe bobbin provides enough material for repeated bench use. Braid number three handles typical through-hole joints and larger surface-mount pads, while finer pitches may require a narrower width for precise control.

Standards-compliant for controlled environments

The flux meets IPC J-STD-004 REL0 classification and satisfies NASA NHB 5300 4 (34-1), NASA NPC 200-4 and NASA SP5002 requirements. This makes the braid suitable for aerospace and high-reliability assemblies where ionic contamination must be avoided. It does not serve applications needing water-soluble or rosin fluxes.

Highlights

  • No-clean flux leaves zero ionic residue
  • Braid #3 width 0.075 in for precise joints
  • 10 ft spool on ESD-safe bobbin
  • Meets IPC J-STD-004 and NASA NHB 5300 4 (34-1) standards
  • Lead-free and non-reactive for reliable rework

Specifications

BrandTechspray
TypeGreen #3 Braid
Color/FinishGreen

Questions about this item

Will the 0.075 in braid fit the tight joints on my older through-hole boards?

The 0.075 in width is sized for medium joints; it wicks cleanly on standard through-hole pads without bridging adjacent pins.

How can I verify the no-clean flux is truly residue-safe after a repair?

The flux meets REL0 classification and NASA NHB 5300 4 (34-1) standards, leaving clear, non-reactive residues that will not leave ionic residue or cause dendrite failure.

Does the 10 ft spool include an ESD-safe bobbin or must I buy one separately?

The braid ships on an ESD-safe bobbin as standard; no separate bobbin purchase is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.