We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow soldering desoldering braid on spool, size 2, 100 ft

TechSpray

TechSpray 1815-100F Soldering Desoldering Braid Size 2 100 ft Yellow

SKU CH-BNNY-0EQ1C

No-clean flux coated braid, 0.055 in wide and 100 ft long, leaves clear non-reactive residues without ionic contamination

  • TypeSoldering & Desoldering Stations
  • Color/FinishYellow
  • Lead-free braid avoids ionic contamination
  • No-clean flux leaves clear, non-reactive residue
  • 100 ft spool provides extended rework capacity
  • 055 in width suits size-2 desoldering tasks
  • Meets IPC J-STD-004 and NASA NHB 5300 4 standards

TechSpray 1815-100F No-Clean Desoldering Braid

This lead-free desoldering braid uses a no-clean flux coating classified REL0 to remove solder without leaving ionic residue. The clear, non-reactive wick meets IPC J-STD-004, MIL-F-14256 and NASA NHB 5300 4 (34-1) standards for high-reliability electronics work.

Thermals Noise and Power Draw

As a passive consumable, the braid generates no heat, noise or electrical draw during use. It relies entirely on the external soldering iron for thermal energy, so workload thermals and acoustics are determined by that tool alone.

100 ft Spool with Standard Bobbin

The 100 ft length on a standard bobbin provides extended supply for production or repair benches. The Size 2 width of 0.055 in suits general through-hole and surface-mount joints, while the yellow colour aids visual identification among other fluxes. Not suited for buyers needing narrower or wider braid widths for fine-pitch or high-mass desoldering tasks.

Highlights

  • Lead-free braid avoids ionic contamination
  • No-clean flux leaves clear, non-reactive residue
  • 100 ft spool provides extended rework capacity
  • 055 in width suits size-2 desoldering tasks
  • Meets IPC J-STD-004 and NASA NHB 5300 4 standards

Specifications

BrandTechspray
TypeSoldering & Desoldering Stations
Color/FinishYellow

Questions about this item

How do I install the 0.055 in wide braid onto a solder joint, and what step do people get wrong?

Place the braid over the joint, press the hot iron tip onto the braid, and let capillary action draw the solder up; the common error is dragging the iron along the braid instead of holding it still until the solder flows.

What maintenance or replacement will the 100 ft spool need later?

The braid is single-use; once a section is saturated with solder it cannot be refreshed, so you simply unwind a fresh length and discard the used portion.

What limit shows up first during sustained desoldering with this no-clean flux coated braid?

The flux coating depletes as you work, so after several joints the wicking action slows and you must advance to a fresh coated section to maintain clean removal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.