Tarps Direct 20' x 30' High Visibility Red 3.3 oz Poly Tarp 8 Mil

High-visibility red poly tarp

The Tarps Direct sheeting measures 20 by 30 feet in cut size and weighs 3.3 ounces per square foot with a 7-8 mil thickness. It is waterproof and resists acid, tears and mildew while the UV-treated red finish keeps the material visible in low light. Grommets placed every 36 inches and at each corner give multiple tie-down points for securing loads or creating temporary shelters. Builders, campers and event organisers can deploy it quickly for ground cover, equipment wraps or triage colour-coding.

Cut-size limits and grommet spacing

The listed dimensions are taken before hemming so the finished tarp will be up to 6 inches or 3-5 percent shorter on each side. This reduction affects coverage calculations for large objects or precise floor plans. Grommets are fixed at 36-inch intervals, so tie-down positions cannot be adjusted closer together without adding extra hardware. The polyethylene fabric has no breathable membrane, meaning condensation can build underneath during extended use in humid conditions.

Simple tie-down installation

Thread rope, bungee cords or straps through the corner and perimeter grommets and tension evenly to avoid tearing the reinforced edges. The most common error is pulling one corner tight before the others, which stresses the material and can rip a grommet out. Because the finished size is smaller than the nominal 20 by 30 feet, measure the actual tarp before cutting any frame or spacing anchor points. Sharp edges on the covered object should be padded to prevent punctures during wind movement.