Tarps Direct
Tarps Direct 12 ft x 12 ft Blue 2.9 oz Polyethylene Tarp 5 Mil
Lightweight 2.9 oz polyethylene tarp with UV treatment, grommets every 36 inches, and waterproof, tear-resistant construction
- Typetools
- FeaturesWaterproof – Acid, Tear and Rot Resistant||5 Mil Thick, Weig
- Waterproof protection for roofs and equipment
- 5 mil polyethylene resists tears, acid and rot
- UV-treated both sides for longer outdoor life
- Aluminium grommets every 36 inches simplify tie-down
- Finished size 3 to 5 % smaller than cut dimensions
Lightweight Economy Cover
This 12 ft by 12 ft polyethylene tarp weighs 2.9 oz per square foot and measures 5 mil thick. It is built for general-purpose protection of roofs, woodpiles and outdoor furniture. The blue finish is waterproof and treated against acid, tear and rot damage. UV treatment on both sides helps the material resist sun degradation.
Grommet Spacing and Cut Size
Aluminium grommets appear every 36 inches along the edges and at each corner for tie-down flexibility. The listed dimensions are cut size, so the finished tarp will measure 6 inches or 3 to 5 percent shorter after hemming. Plan your coverage area with that reduction in mind.
No Extra Accessories Included
The product ships as the tarp alone without ropes, bungee cords or repair patches. You supply the fasteners that suit your anchoring points. The UV treatment and waterproof coating are the only built-in features that change long-term performance.
Highlights
- Waterproof protection for roofs and equipment
- 5 mil polyethylene resists tears, acid and rot
- UV-treated both sides for longer outdoor life
- Aluminium grommets every 36 inches simplify tie-down
- Finished size 3 to 5 % smaller than cut dimensions
Specifications
| Brand | Harpster Tarps |
|---|---|
| Type | tools |
| Features | Waterproof – Acid, Tear and Rot Resistant||5 Mil Thick, Weighs 2.9 oz. per Square foot||UV Treated on both sides||Grommets spaced every 36 inches||Cut Size – Will measure 6” or 3 to 5% shorter |
Questions about this item
How long can the tarp stay in direct sunlight before the polyethylene breaks down?
Both sides are UV treated to resist degradation during extended outdoor exposure.
Will the aluminium grommets or the fabric tear first if the tarp flaps in high wind all day?
Grommets are spaced every 36 inches along reinforced edges to distribute stress across the 8 x 10 weave.
Does the finished cover measure exactly 12 ft by 12 ft, or do I need to allow for the cut-size reduction?
Cut size means the finished tarp will be 6 inches or 3 to 5 percent shorter in each direction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



