Taco Inc
Taco Inc 2400-40S Flanged circulating pump
A circulating pump for potable systems delivering up to 26 gpm at 10 ft head and 16 gpm at 15 ft head with a 1/6 hp single-speed motor
- TypeLearning Thermostats
- Delivers up to 26 gpm at 10 ft head for strong circulation
- Handles 19 ft maximum head to overcome system resistance
- Runs on 115/230 V single-phase power for flexible wiring
- EPDM body gasket suits potable water systems safely
- Compact 8-1/2 in face-to-face dimension fits tight spaces
Pump purpose and fit
The Taco 2400-40S is a flanged circulating pump built for potable-water systems. It serves hydronic heating loops, domestic hot-water recirculation and similar closed-loop duties where a standard single-speed unit is specified.
Pipework and electrical checks
Verify that the existing flanges match the 1 1/4 in and 1 1/2 in intake sizes and the 8 1/2 in face-to-face dimension. Confirm the supply is single-phase 115/230 V AC and that the circuit can deliver 1.0 A at 115 V or 1.9 A at 230 V.
System integration
The pump develops a maximum head of 19 ft and delivers 26 gpm at 10 ft or 16 gpm at 15 ft of head. Its EPDM body gasket suits potable water, and the single-speed 1/6 hp motor runs directly on line voltage without a separate controller.
Highlights
- Delivers up to 26 gpm at 10 ft head for strong circulation
- Handles 19 ft maximum head to overcome system resistance
- Runs on 115/230 V single-phase power for flexible wiring
- EPDM body gasket suits potable water systems safely
- Compact 8-1/2 in face-to-face dimension fits tight spaces
Specifications
| Brand | TACO |
|---|---|
| Type | Learning Thermostats |
Questions about this item
Does the pump come with the flanges and gaskets needed for installation?
The pump body includes an EPDM gasket; flanges are not supplied and must be purchased separately to match the 1 1/4 in or 1 1/2 in pipe size.
How do I decide between the 1 1/4 in and 1 1/2 in intake options?
Choose the size that matches the existing piping in the system — both flange sizes are supported by the same pump body.
What flow can I expect at 15 ft of head in a typical hydronic loop?
At 15 ft of head the pump delivers 16 gpm; at 10 ft of head it delivers 26 gpm.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



