SUPCO
SUPCO TA2 Temperature Alarm -10 to 80F
Monitors temperature from -10 to 80 °F with audible and visual alerts, a 72-inch sensor cord and 120 V AC power
- Monitors -10 to 80 °F for critical temperature control
- Audible and visual alerts give immediate warning of temperature changes
- 72 in sensor cord reaches remote locations with 24 AWG extension option
- 120 V AC power with 5 A contact rating supports phone dialer or remote alarm
- Adjustable 0 or 1 hour delay prevents nuisance trips during normal fluctuations
Product Identity
The SUPCO TA2 is a temperature alarm designed for monitoring environments between -10 and 80 degrees Fahrenheit. It provides both audible and visual indication when thresholds are crossed and suits installers who need a straightforward alert device.
Installation Checks
Verify that a 120V AC power source is available at the mounting location and that the 72-inch cord reaches the outlet or can be extended with 24AWG stranded wire. Confirm the 3-inch width and 4 7/8-inch height fit the intended enclosure and that the 5A contact rating matches the connected load.
Thermals Power Noise
The unit operates from 120V AC mains and draws up to 5A through its relay contacts during alarm conditions. Normal standby consumption is minimal and the device produces no fan noise, only an audible alert when the temperature rises or falls past the set point.
Highlights
- Monitors -10 to 80 °F for critical temperature control
- Audible and visual alerts give immediate warning of temperature changes
- 72 in sensor cord reaches remote locations with 24 AWG extension option
- 120 V AC power with 5 A contact rating supports phone dialer or remote alarm
- Adjustable 0 or 1 hour delay prevents nuisance trips during normal fluctuations
Specifications
| Brand | SUPCO |
|---|
Questions about this item
Does the SUPCO TA2 include the sensor wire or do I need to buy it separately?
The temperature alarm ships with the sensor wire and instructions in the box.
How do I choose between the rise and fall activation modes on the TA2?
Select the mode that matches the condition you want to detect — rising temperature for over-heat warnings or falling temperature for freeze protection.
What does the 5 A contact rating mean when I wire the alarm into a 120 V AC circuit?
The relay contacts can switch up to 5 amps at 120 V AC, so they can directly control a small load or trigger a phone dialer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



