We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2 metre SFP+ direct-attach twinax cable with latching plugs at both ends

STARTECH

STARTECH SFPCMM2M network ethernet cable SFP+ 2 m 10 GbE

SKU CH-31NB-K07G3 MPN SFPCMM2M

Connects 10 GbE SFP+ devices using a 2 m passive copper twinax cable with < 0.05 W power draw

  • TypeNetwork Cable
  • Connector A1 x SFP+ Latching Plug
  • Connector B1 x SFP+ Latching Plug
  • Length6.60 ft.
  • ColorBlack
  • FeaturesConnect 10GbE SFP+ network devices with this high-quality re
  • 10 GbE throughput for short-range links
  • 2 m passive copper replaces costly fibre
  • < 0.05 W draw keeps rack power low
  • Hot-swappable SFP+ ends work with Cisco 2960, 6500 and Nexus 7000
  • MSA-compliant build matches Cisco SFP-H10GB-CU2M spec

Cisco-Compatible 10GbE SFP+ Cable

This 2-metre passive twinax cable connects two SFP+ ports at 10 GbE. It is built to match the Cisco SFP-H10GB-CU2M part and meets MSA industry standards. The latching plugs ensure a secure fit in compatible switches and network cards. Power draw stays below 0.05 W.

Suits Direct 10G Links, Not Longer Runs

Network teams needing a short, low-power link between two SFP+ switches or servers will find this cable fits the slot. Buyers who need fibre reach beyond a rack or who require active optics for longer distances should look at a different solution. The fixed 2-metre length cannot be extended.

MSA-Compliant Passive Twinax Construction

The cable follows the SFP+ MSA specification for passive direct-attach copper. This single detail decides whether the module will initialise in a given switch port. Compatibility is guaranteed against the Cisco SFP-H10GB-CU2M reference.

Highlights

  • 10 GbE throughput for short-range links
  • 2 m passive copper replaces costly fibre
  • < 0.05 W draw keeps rack power low
  • Hot-swappable SFP+ ends work with Cisco 2960, 6500 and Nexus 7000
  • MSA-compliant build matches Cisco SFP-H10GB-CU2M spec

Specifications

BrandStarTech.com
ModelSFPCMM2M
TypeNetwork Cable
Connector A1 x SFP+ Latching Plug
Connector B1 x SFP+ Latching Plug
Length6.60 ft.
ColorBlack
FeaturesConnect 10GbE SFP+ network devices with this high-quality replacement SFP cable
Compatible with SFP+ enabled Fiber switches such as the Cisco Catalyst 2960 / 6500 Series and Cisco Nexus 7000 Series
Comparable to Cisco SFP-H10GB-CU2M / SFPH10GBCU1-5M
Small Form Factor pluggable cable
2 Meter / 6.6 ft
Twinaxial cable
10gbase-cu sfp+ / SFP H10GB CU2M / 10gb sfp+ Cable / sfp+ Cable / 10gb twinax Cable / sfp+ direct attach Cable / SFP+ Cable / Compliant with MSA
Shipping weight0.11 kg
Package size212 × 189 × 24 mm

Questions about this item

How can I confirm the 2 m SFP+ direct-attach cable is passing 10 GbE traffic after I plug it in?

Verify the link LED on each SFP+ port shows an active 10 GbE connection and run a throughput test between the two devices to confirm full line-rate performance.

What comes with the SFPCMM2M cable and do I need to buy SFP+ transceivers separately?

The package contains the 2 m passive twinax cable with SFP+ latching plugs on both ends; no separate transceivers are required because the connectors are integrated.

Which length should I choose if my switch ports are 6.6 ft apart?

The 2 m (6.6 ft) SFPCMM2M matches that distance exactly and is the only length offered for this model.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.