STARTECH
STARTECH C6ASPAT2BK network ethernet cable Cat6a shielded 2 ft black snagless RJ45
Shielded Cat6a patch cable delivers 10 Gigabit connections free of EMI/RFI interference with snagless RJ45 connectors
- TypeConsumer Electronics
- Cat6A
- Connector ARJ45
- Connector BRJ45
- Length2 ft.
- ColorBlack
- 10 Gigabit network connections free of noise and EMI/RFI interference
- Shielded with aluminum-polyester foil for reliable signal integrity
- Snagless RJ45 connectors protect locking tabs during installation
- 26 AWG stranded copper conductors rated for 100 W PoE
- CMG fire-rated jacket meets ANSI/TIA-568-D Category 6 requirements
Two-foot Cat6a shielded patch cable
This two-foot Cat6a shielded patch cable uses 26 AWG stranded copper conductors and aluminium-polyester foil shielding to deliver 10 Gigabit Ethernet performance. The black PVC jacket is CMG rated for general-purpose installation and the snagless RJ45 connectors protect the locking tabs during frequent moves. It is built for installers and IT teams who need a short, reliable link in dense racks or at the desk. ||
Check connector spacing and cable routing
Verify that the 2 ft length reaches between your switch port and the target device without tension or sharp bends. Confirm the equipment uses standard RJ45 ports and that the shielding can be grounded at the patch panel or switch side. The cable is rated for 100 W PoE, so ensure the connected ports support the required power class if you plan to run high-power devices. ||
Sustained 10 Gbps throughput with EMI protection
Under continuous load the foil shield maintains signal integrity by rejecting EMI and RFI that would otherwise degrade a 10 Gbps stream. The stranded 26 AWG conductors resist fatigue from vibration or repeated re-patching, keeping attenuation stable over time. CMG-rated PVC meets commercial fire-safety requirements for permanent runs in walls or ceilings. ||
Highlights
- 10 Gigabit network connections free of noise and EMI/RFI interference
- Shielded with aluminum-polyester foil for reliable signal integrity
- Snagless RJ45 connectors protect locking tabs during installation
- 26 AWG stranded copper conductors rated for 100 W PoE
- CMG fire-rated jacket meets ANSI/TIA-568-D Category 6 requirements
Specifications
| Brand | StarTech.com |
|---|---|
| Model | C6ASPAT2BK |
| Type | Consumer Electronics |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 2 ft. |
| Color | Black |
| Shielded | Aluminum-polyester foil |
| Features | Deliver high-performance 10 Gigabit network connections, free of noise and EMI / RFI interference Hardware Cable Jacket Type: PVC - Polyvinyl Chloride Cable Type: Shielded Snag-less Fire Rating: CMG Rated (General Purpose) Number of Conductors: 4 Pair STP Performance Cable Rating: CAT6a - 10 Gbit/s Physical Characteristics Conductor Type: Stranded Copper Wire Gauge: 26 AWG |
| Shipping weight | 0.05 kg |
| Package size | 193 × 192 × 34 mm |
Questions about this item
Does the 2 ft Cat6a cable come with both RJ45 ends ready to use or do I need separate connectors?
The cable arrives with RJ45 connectors on both ends, so no additional plugs or crimping tools are required.
The listing mentions 26 AWG stranded copper — is that the only gauge option for this model?
Yes, the C6ASPAT2BK uses 26 AWG stranded 100 % copper conductors throughout its 2 ft length.
The headline says 10 Gigabit — will I actually see that speed on a typical home router?
It supports 10 Gbps up to its rated distance provided the switch, router and network cards at both ends also handle 10 Gigabit Ethernet.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SATACables
SATACables MSD-887 micro SATA extension cable 20 inch 46mm SATA 2.6
- 1.66 ft.
$3.99
0.00004651BTC
In stock
eForChina
eForChina 19V 4.74A 90W UK Plug AC Adapter 5.5x2.5mm Black
- Black
- Power Adapter
$18.99
0.00022138BTC
In stock