We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power brick with 24V 6.6A label, detachable AC cord and terminal block connectors

STARTECH

STARTECH 160W 24V 6.6A DC Power Adapter

SKU CH-7ZAP-Q962A GTIN 065030897570

Delivers 24 V 6.6 A DC power with 1.2 m cable and swappable terminal blocks for industrial USB hubs

  • Worldwide use with auto-switching 100-240V AC input
  • 160W output delivers 24V at 6.6A for demanding hubs
  • 2m DC cord plus four regional AC cables included
  • 2-pin and 3-pin terminal blocks fit varied equipment
  • Compatible with StarTech industrial USB hubs including 1030 4200 4300 7200 7300 series

Universal DC Power Adapter

This 160W universal DC power adapter delivers a 24V 6.6A output suitable for industrial USB hubs and similar equipment. The auto-switching 100-240V AC input works across NA UK EU and ANZ regions with four included regional AC cables. A 1.2m DC cord provides flexible placement for fixed installations.

Terminal Block Installation

Both 2-pin and 3-pin terminal block connectors are supplied so you can match the hub wiring without soldering. Strip the 2-wire DC cord, insert the conductors into the chosen block and tighten the screws for a secure connection. The only common issue is reversing polarity; verify the hub markings before tightening.

158.4W Capacity and Headroom

The adapter supplies up to 158.4W continuous power, enough for hubs such as the HB30A10AME ST1030USBM ST4300USBM and 5G16AINDS-USB-A-HUB running multiple BC 1.2 ports. It will not support hubs or devices that draw more than 160W total or require a voltage other than 24V DC.

Highlights

  • Worldwide use with auto-switching 100-240V AC input
  • 160W output delivers 24V at 6.6A for demanding hubs
  • 2m DC cord plus four regional AC cables included
  • 2-pin and 3-pin terminal blocks fit varied equipment
  • Compatible with StarTech industrial USB hubs including 1030 4200 4300 7200 7300 series

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the adapter is delivering 24V and 6.6A after I connect it?

Measure the DC output with a multimeter set to volts and amps; it should read 24V and up to 6.6A when the hub is under load.

What cables and connectors come in the box, and what must I source separately?

The box includes the adapter, a 1.2m DC cord with 2-pin and 3-pin terminal blocks, and four 1.2m AC cords for NA, UK, EU and ANZ outlets; no extra cables are required for listed hubs.

Which version should I choose for a StarTech ST7300USBME hub?

This single 160W 24V 6.6A model with both terminal blocks is the correct match for the ST7300USBME and all other listed industrial USB hubs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.