We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three spools of flat copper desoldering braid on reels

SRA Solder Desoldering Braid 3 Pack 10ft .098" No-Clean Flux

SKU CH-15TN-05WZE

Three spools give 30 feet of .098" copper braid with no-clean flux for fast, residue-free solder removal

  • Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors
  • 30 ft total wick length across three 10 ft spools
  • No-clean flux leaves non-conductive, non-corrosive residue requiring no cleaning
  • Gap-weave copper braid absorbs solder quickly to reduce overheating risk
  • Impurity-free virgin copper construction maintains superior conductivity at low temperatures
  • Simple place-and-heat action removes solder bridges and corrects soldering mistakes

Three 10ft spools for bench technicians

The pack supplies 30 feet of .098-inch copper braid pre-coated with 3% no-clean flux. Each spool is ready for component removal, bridge correction and general rework on through-hole or surface-mount assemblies.

.098-inch braid width sets joint access

The standard-width weave fits common pad spacing and lead pitches found on consumer and industrial PCBs. Narrower or wider braids are not included, so verify the pitch matches the work before starting.

Low-temperature wicking protects substrates

Impurity-free copper and gapped weave draw solder quickly at modest iron temperatures, reducing the risk of lifted pads and thermal stress. Residue is non-conductive, non-corrosive and requires no post-cleaning.

Highlights

  • 30 ft total wick length across three 10 ft spools
  • No-clean flux leaves non-conductive, non-corrosive residue requiring no cleaning
  • Gap-weave copper braid absorbs solder quickly to reduce overheating risk
  • Impurity-free virgin copper construction maintains superior conductivity at low temperatures
  • Simple place-and-heat action removes solder bridges and corrects soldering mistakes

Specifications

Compatibility/FitmentOut-Opening, Narrow Stile, Store Front Doors

Questions about this item

How much desoldering length does the three-pack give me?

The pack supplies three 10-foot spools for a total of 30 feet of .098-inch braid.

Will the no-clean flux leave conductive residue on my board?

The flux residue is non-conductive and non-corrosive, so no cleaning is required after use.

What width is the braid so I know it fits my component spacing?

The braid measures .098 inches wide, a standard size for most through-hole and surface-mount work.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.