SQUARE D
SQUARE D QOB260 Miniature Circuit Breaker 60A 2 Pole 120/240V AC
A 60 A, two-pole bolt-on breaker for QO load centres, rated 120/240 V AC with a 10 kA interrupting capacity
- Protects 120/240 V AC circuits at 60 A
- Bolt-on mounting fits Square D QO panelboards
- 10 kA interrupting rating handles high fault currents
- Rated for 48 V DC and 77 °F minimum operating temperature
- Compact 3.1 in x 1.5 in x 2.9 in frame saves panel space
60 A Bolt-On Breaker for QO Panels
The Square D QOB260 is a two-pole miniature circuit breaker rated at 60 amps for 120/240 V AC and 48 V DC systems. It mounts with a bolt-on connection and uses a paddle actuator for manual switching. The unit carries a 10 kA interrupting rating at 120/240 V AC and fits within a 100 A QO frame.
Ideal for Standard QO Load Centres
Suited for electricians and facility managers adding or replacing branch protection in Square D NQOD panelboards where a standard 60 A two-pole breaker is required. Not a fit for panels that accept only plug-on breakers, for applications needing a higher interrupting rating, or for three-phase loads that demand a three-pole device.
Fits QO Series Enclosures
The breaker installs directly into compatible QO load centres using the bolt-on mounting style and lug terminals. Its 3.1 in length, 1.5 in width and 2.9 in depth allow it to occupy a standard two-pole slot without special spacing. Operating temperature minimum is 77 degrees F, so the enclosure must remain above that threshold.
Highlights
- Protects 120/240 V AC circuits at 60 A
- Bolt-on mounting fits Square D QO panelboards
- 10 kA interrupting rating handles high fault currents
- Rated for 48 V DC and 77 °F minimum operating temperature
- Compact 3.1 in x 1.5 in x 2.9 in frame saves panel space
Specifications
| Brand | SQUARE D |
|---|
Questions about this item
Does this QOB260 breaker require a Square D QO series panelboard to install?
Yes, it is designed for Square D QO and NQOD panelboards and uses a bolt-on mounting style.
Will the 10 kA interrupting rating at 120/240 V AC protect older branch circuits in the same panel?
The 10 kA AIR rating applies to the breaker itself; existing circuits remain protected by their own devices.
How can I verify the breaker is operating correctly after installation?
Confirm the paddle actuator moves firmly to the ON position and the circuit carries load without nuisance tripping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



