SQUARE D
SQUARE D QO115VH 15A 1-Pole 120/240V Circuit Breaker
Provides 15 A single-pole protection with 22 kA interrupting capacity for QO load centres
- High interrupting capacity protects circuits with 22kA rating
- Single-pole 15A design handles 120/240V AC loads
- Plug-in mounting fits QO load centres and NQ panelboards
- Screw-clamp terminals secure connections on 100A frame
- Compact 3in by .75in by 2.91in size saves panel space
QO115VH 15 A High-Interrupting Breaker
The SQUARE D QO115VH is a single-pole miniature circuit breaker rated 15 A at 120/240 V AC with a 22 kA interrupting capacity. It uses a plug-in mounting style and screw-clamp terminals for installation in QO load centres and NQ panelboards. The toggle actuator provides manual switching and clear trip indication. This new device suits residential and light-commercial branch-circuit protection.
Fits QO load centres only
Electricians wiring a QO-series panel will find this breaker matches the bus and frame dimensions exactly. Installers working with Homeline, BR or other panel families cannot use this unit because the plug-in base and latch geometry differ. Buyers who need a two-pole or higher-amperage device must select a different catalogue number. The 48 V DC rating does not replace a dedicated DC breaker for solar arrays.
22 kA interrupting rating at 120/240 V AC
The 22 kA AIR rating is the single figure that determines whether this breaker meets the available fault current at the panel. If the service calculation shows prospective short-circuit current above 22 kA, a higher-rated breaker is required. For standard residential services where the utility fault current is lower, this rating satisfies Code requirements. No other specification in the data sheet overrides this limit.
Highlights
- High interrupting capacity protects circuits with 22kA rating
- Single-pole 15A design handles 120/240V AC loads
- Plug-in mounting fits QO load centres and NQ panelboards
- Screw-clamp terminals secure connections on 100A frame
- Compact 3in by .75in by 2.91in size saves panel space
Specifications
| Brand | SQUARE D |
|---|
Questions about this item
Will this 15 A QO breaker fit my existing QO load center?
Yes, it is designed for QO load centers and NQ panelboards with a plug-in mounting style that matches the QO bus.
Can I use this single-pole 120/240 V breaker on a 48 V DC circuit?
The breaker carries a 48 V DC rating, so it can protect a 48 V DC branch when installed in a compatible panel.
How do I confirm the breaker is seated correctly after installation?
Push the breaker onto the bus until it snaps firmly in place, then toggle the handle to ON and verify the circuit is energised.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



