We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey plastic wall-mount enclosure with black and red push buttons

SQUARE D

SQUARE D 9001BG201 Control Station Feed-Thru 2 Button Black Red

SKU CH-W2DF-HY1F1

A 30 mm industrial control station with two momentary push buttons in black and red, 1NO/1NC contacts rated 5A at 600V AC, IP20 enclosure and 1/2 in to 3/4 in NPT hub

  • TypeIndustrial Electrical Controls & Automation
  • Size30 mm
  • Two momentary push buttons for start/stop control
  • 30 mm operator size fits standard industrial cut-outs
  • 5 A contact rating at 600 V AC and 24 V DC
  • IP20 enclosure protects contacts from finger contact
  • 1/2 in to 3/4 in NPT hub simplifies conduit entry

30 mm two-button control station

This 30 mm Square D control station provides two momentary push buttons in a single wall-mount enclosure. The black and red operators are labelled Start and Stop and each carries a 1NO/1NC contact rated at 5A @ 600V AC and 24V DC. NEMA 1 and IP20 ratings suit indoor industrial environments.

Wall-mount enclosure with 1/2–3/4 in NPT hub

The grey plastic housing measures 3.69 in high, 2.06 in wide and 2.34 in deep and accepts a 1/2 in to 3/4 in NPT conduit hub. This feed-through design lets wiring enter and exit the same box, freeing panel space that separate push-button stations would occupy.

Momentary action rated for continuous 5 A duty

Both contacts are momentary, returning to their normal state when released, and are rated for sustained 5 A loads at 600 V AC or 24 V DC. The IP20 enclosure protects the contacts from finger contact and light dust during prolonged operation.

Highlights

  • Two momentary push buttons for start/stop control
  • 30 mm operator size fits standard industrial cut-outs
  • 5 A contact rating at 600 V AC and 24 V DC
  • IP20 enclosure protects contacts from finger contact
  • 1/2 in to 3/4 in NPT hub simplifies conduit entry

Specifications

BrandSQUARE D
TypeIndustrial Electrical Controls & Automation
Size30 mm

Questions about this item

Does the 5 A contact rating at 600 V AC limit how long I can run the start/stop buttons continuously?

The contacts are rated for 5 A at 600 V AC and 24 V DC; sustained operation stays within that limit as long as the load does not exceed it.

How much heat does the enclosure generate when both momentary push buttons are cycled all day?

The plastic NEMA 1 / IP20 enclosure dissipates heat passively; no forced cooling is required for the rated 5 A contact load.

What wiring and conduit must I already have to mount this 30 mm control station on a wall?

You need 1/2 in to 3/4 in NPT hub fittings and conductors sized for up to 5 A at 600 V AC to connect the 1NO/1NC contacts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.