We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey plastic wall-mounted control station with three black and red push buttons labelled Start Jog Stop

SQUARE D

SQUARE D 30 mm Control Station Start/Jog/Stop

SKU CH-VH8K-R4WGR

A three-button industrial control station with momentary Start, Jog and Stop push buttons in a 30 mm plastic enclosure rated IP20 and NEMA 1

  • TypeIndustrial Electrical Controls & Automation
  • Size30 mm
  • Three momentary push buttons for Start/Jog/Stop control
  • 5 A contact rating at 600 V AC / 24 V DC
  • NEMA 1 enclosure with IP20 protection for indoor use
  • 30 mm operator size fits standard panel cut-outs
  • Wall-mount plastic housing with 1/2 in to 3/4 in NPT hub

30 mm Start/Jog/Stop Control Station

The SQUARE D 30 mm control station provides three momentary push-button operators labelled Start, Jog and Stop for industrial machine control. It mounts on a wall and uses a plastic enclosure rated NEMA 1 and IP20 for indoor use.

Check supply voltage and conduit size before

The contacts are rated 5 A at 600 V AC or 24 V DC with NEMA B600/P600 designation. The hub accepts 1/2 in to 3/4 in NPT conduit. Wiring must match the 2NO/3NC contact form and the available panel space of 2.19 in height by 2.06 in width.

Plastic enclosure with momentary black and red

Two black and one red operator give clear visual distinction for start, jog and stop functions. All buttons are momentary with no mechanical interlock, so each press returns automatically. The 5 in depth fits standard wall boxes while the IP20 rating limits use to protected indoor environments.

Highlights

  • Three momentary push buttons for Start/Jog/Stop control
  • 5 A contact rating at 600 V AC / 24 V DC
  • NEMA 1 enclosure with IP20 protection for indoor use
  • 30 mm operator size fits standard panel cut-outs
  • Wall-mount plastic housing with 1/2 in to 3/4 in NPT hub

Specifications

BrandSQUARE D
TypeIndustrial Electrical Controls & Automation
Size30 mm

Questions about this item

What operators and wiring components are included with the 30 mm control station?

The station ships with three momentary push buttons — Start (black), Jog (black), and Stop (red) — pre-wired to 2NO and 3NC contacts rated 5 A at 600 V AC or 24 V DC.

Which contact configuration suits a standard motor starter circuit?

The 2NO / 3NC arrangement lets Start and Jog close normally-open circuits while Stop opens normally-closed safety circuits, matching typical three-wire control schemes.

How does the 5 A contact rating translate to actual coil or pilot duty?

At 600 V AC the B600 rating handles standard motor starter coils, and at 24 V DC the P600 rating supports common relay and PLC inputs within the 5 A limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.