SPEEDAIRE
SPEEDAIRE Solenoid Air Control Valve 4-Way 24V DC 145 psi
Controls pneumatic flow with a four-way solenoid valve rated for 24V DC and 145 psi maximum pressure
- 4-way solenoid valve directs airflow in pneumatic circuits
- 24 V DC coil operates on standard control voltage
- 5 cfm flow coefficient supports compact actuator sizing
- 25–145 psi pressure range covers typical shop air systems
- NEMA 4 rating resists dust and splashing water
Valve Type & Voltage
This SPEEDAIRE solenoid air control valve is a four-way, two-position unit designed for 24V DC operation. It suits pneumatic systems requiring directional flow control in industrial or mobile equipment. The base-mounted body style allows direct manifold installation.
Coil & Sealing Performance
The packed spool shifting technology draws 3.2 W and requires a minimum pilot pressure of 25 psi to actuate. NEMA 4 rating protects the coil from splashing water and dust ingress. Operational pressure spans 25 to 145 psi with a vacuum range of 0 to 28 in Hg.
Mounting & Compliance Checks
Verify that your manifold matches the ISO 5599-2 base pattern before ordering. Ensure the supply pressure stays within the stated range and that 24V DC power is available at the connector. The product carries a California Proposition 65 warning for chemical exposure.
Highlights
- 4-way solenoid valve directs airflow in pneumatic circuits
- 24 V DC coil operates on standard control voltage
- 5 cfm flow coefficient supports compact actuator sizing
- 25–145 psi pressure range covers typical shop air systems
- NEMA 4 rating resists dust and splashing water
Specifications
| Brand | PARKER |
|---|
Questions about this item
What maintenance will the packed spool in this 4-way valve require over time?
The packed spool design uses internal seals that can wear from contamination; regular filtration to ISO 5599-2 standards and periodic inspection of the 25 psi pilot pressure supply will extend service life.
What limit appears first when running this solenoid continuously at 145 psi?
The coil draws 3.2 W at 24 V DC, so sustained operation is limited by heat rise in the solenoid housing rather than the 1.5 cfm flow capacity or 145 psi pressure rating.
How much heat and noise does the valve produce during all-day operation?
Power consumption is 3.2 W, generating modest heat in the NEMA 4 enclosure; the packed spool shifts quietly with no continuous airflow noise when energised.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



