SPEEDAIRE
SPEEDAIRE 5VNW7 Cylinder Mounting Hardware Clevis 2 1/2 in
Rod clevis mounting hardware fits 2 1/2 in and 3 in bore cylinders with a 3/4 in thread and includes a jam nut
- Clevis mount secures 2 1/2 in bore cylinders
- Aluminium body resists corrosion in compressed-air systems
- Jam nut included locks the rod eye in place
- 5 in hole centres simplify alignment during installation
- 3/4 in thread fits standard Speedaire rod ends
Mounting Clevis for 2 1/2 in Bore
This SPEEDAIRE cylinder mounting hardware is a rod clevis designed for pneumatic cylinders with a 2 1/2 in bore diameter. It provides a secure pivot connection between the piston rod and the machine load. The aluminium body includes a jam nut for locking the threaded joint. It is intended for maintenance crews and OEM assemblers working on compatible air systems.
Suited for Inch-Series Repairs
The clevis fits Speedaire-branded cylinders using a 3/4 in thread size and a 0.5 in mount hole center-to-center width. It is not suitable for metric-threaded rods or for cylinders with a different bore or pin spacing. Buyers needing a different thread pitch, a larger bore fit, or a non-aluminium body should look at other mounting styles.
3/4 in Thread Size Decides Fit
The single specification that determines compatibility is the 3/4 in thread size on the rod end. This must match the piston rod threads exactly for the clevis to install correctly. Verify the rod diameter and thread pitch against the equipment manual before ordering.
Highlights
- Clevis mount secures 2 1/2 in bore cylinders
- Aluminium body resists corrosion in compressed-air systems
- Jam nut included locks the rod eye in place
- 5 in hole centres simplify alignment during installation
- 3/4 in thread fits standard Speedaire rod ends
Specifications
| Brand | SPEEDAIRE |
|---|
Questions about this item
Will the included jam nut and aluminum clevis body need periodic retightening or replacement under normal use?
The jam nut is included with the clevis; the aluminum body and 0.5 in centre-to-centre mount holes should be inspected for elongation or wear during routine maintenance.
What dimensional limit will be reached first if the 2 1/2 in bore cylinder is cycled continuously at full stroke?
The 2 3/8 in overall length and 1 1/4 in overall width fix the mounting envelope; exceeding the 0.5 in hole spacing under side load will elongate the holes before the aluminum yields.
Does the aluminum clevis generate noticeable heat or require extra power when the compressor runs all day?
The clevis is a passive mounting bracket with no moving internals, so it produces no heat and draws no power during continuous compressor operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00212067BTC
In stock