We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium rod clevis with M20 thread, 87 mm long, 25 mm wide

SPEEDAIRE

SPEEDAIRE 5VMG7 Rod Clevis 80 100mm Bore Cylinders

SKU CH-XD8R-XYY8A

Rod clevis for 80 mm and 100 mm bore cylinders with M20×1.5 thread and 87 mm length

  • Fits 80 mm and 100 mm bore cylinders for direct replacement
  • M20 x 1.5 thread size matches existing rod ends precisely
  • Aluminium body resists corrosion while keeping weight low
  • Swivel rod eye included so no extra parts are needed
  • 87 mm overall length and 25 mm width suit compact installations

Rod Clevis for 80 mm and 100 mm Bore Cylinders

The SPEEDAIRE 5VMG7 rod clevis fits pneumatic cylinders with 80 mm or 100 mm bore diameters. It provides a pivoting connection between the piston rod and the machine linkage. The aluminium body keeps weight low while maintaining strength for industrial air systems. This new mounting accessory is designed for metric-threaded rod ends.

M20 × 1.5 Thread with Swivel Rod Eye

The single specification that decides fit is the M20 × 1.5 thread size on the included swivel rod eye. The clevis accepts this metric thread directly, allowing the rod to articulate without binding. Overall length is 87 mm and overall width is 25 mm, so the envelope must match the cylinder’s mounting geometry. No other thread sizes are accommodated by this part.

Sustained Load Behaviour

Under continuous cycling the aluminium clevis and swivel eye distribute side loads evenly across the pin joint. The metric thread engagement resists loosening when vibration is present over long runs. The swivel action reduces bending stress on the piston rod during extended strokes. California Proposition 65 warnings apply to chemicals in the product.

Highlights

  • Fits 80 mm and 100 mm bore cylinders for direct replacement
  • M20 x 1.5 thread size matches existing rod ends precisely
  • Aluminium body resists corrosion while keeping weight low
  • Swivel rod eye included so no extra parts are needed
  • 87 mm overall length and 25 mm width suit compact installations

Specifications

BrandSPEEDAIRE

Questions about this item

How does the 80 100mm bore specification affect which cylinder this rod clevis fits?

The clevis is designed for cylinders with an 80 mm bore diameter, matching the metric thread size M20x1.5 for the piston rod connection.

What does the M20x1.5 thread size limit in terms of compatible rod ends?

The M20x1.5 metric thread determines which piston rods can attach; only rods with the same thread pitch and diameter will screw into the swivel rod eye.

What physical dimensions must the mounting point accommodate for this 87 mm long clevis?

The clevis has an overall length of 87 mm and an overall width of 25 mm, so the mounting bracket needs clearance for both measurements.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.