We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal pneumatic condensate separator with sight glass and aluminium bowl guard

SPEEDAIRE

SPEEDAIRE 4ZL15 Condensate Separator 2" NPT 750 cfm 250 psi

SKU CH-1WQ4-FXVST

Removes water from compressed air lines at up to 750 cfm and 250 psi with a 2-inch NPT connection

  • Handles high-volume air flow up to 750 cfm for demanding pneumatic systems
  • Rated to 250 psi maximum operating pressure for heavy-duty compressed-air applications
  • Manual drain operation gives direct control over condensate removal timing
  • Metal body with integrated sight glass allows instant visual fluid-level checks
  • Aluminium bowl and guard provide corrosion-resistant durability in harsh environments

Condensate Separator 2" NPT 750 cfm

The SPEEDAIRE 4ZL15 removes moisture from compressed air lines at flow rates up to 750 cfm. It connects via 2-inch NPT female ports and handles a maximum operating pressure of 250 psi. The unit is built with a metal body and an aluminium bowl protected by an aluminium guard. It suits workshops and plants needing reliable air drying at the point of use.

Manual drain operation under continuous flow

This separator relies on a manual drain, so condensate must be emptied by hand during sustained operation. Rated flow of 750 cfm at 100 psi means it can serve high-demand tools without restricting supply. The metal construction with sight glass lets operators monitor liquid level while the system runs. Regular draining prevents carry-over into downstream equipment.

Metal body and aluminium bowl for heat dissipation

The all-metal housing and aluminium bowl conduct heat away from the air stream during normal use. No powered drain or heater is included, so the unit adds no electrical load or noise. Weight is 12.5 kg, and the outside diameter is 8 1/4 inches for mounting reference. Minimum operating temperature is 5 degrees Celsius.

Highlights

  • Handles high-volume air flow up to 750 cfm for demanding pneumatic systems
  • Rated to 250 psi maximum operating pressure for heavy-duty compressed-air applications
  • Manual drain operation gives direct control over condensate removal timing
  • Metal body with integrated sight glass allows instant visual fluid-level checks
  • Aluminium bowl and guard provide corrosion-resistant durability in harsh environments

Specifications

BrandSPEEDAIRE

Questions about this item

How much heat or noise does the 4ZL15 generate during continuous 750 cfm operation?

The separator has no motor or moving parts, so it adds no measurable heat or noise; only the compressed air passing through it produces sound.

What fittings or piping must I already have to connect the 2" NPT inlet and outlet?

You need 2" NPT male threads on both supply and discharge lines, plus thread sealant or tape rated for 250 psi service.

Will the 8 1/4" body and 12.5 kg weight fit the existing bracket on my older 250 psi compressor?

The unit measures 8 1/4" outside diameter and weighs 12.5 kg; verify your bracket's bolt pattern and load rating before mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.