We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black palm-grip air sander with rear exhaust

SPEEDAIRE

SPEEDAIRE 31XG59 air compressor 0.20 hp 6 in

SKU CH-HN11-015QM

A 6-inch random orbital sander delivering 0.20 hp at 90 psi with a 3/16-inch orbit for light-duty sanding tasks

  • Lightweight 1.3 lb design reduces operator fatigue
  • Random orbital motion with 3/16 in orbit delivers smooth finishes
  • 2 hp motor runs on 8 cfm at 90 psi
  • Palm grip and rear exhaust improve comfort and control
  • Adhesive-backed 6 in disc mount enables quick abrasive changes

SPEEDAIRE 31XG59 air sander

The SPEEDAIRE 31XG59 is a new, light-duty air-powered random orbital sander built for palm-grip control. It uses a 6-inch adhesive-backed disc and a 3/16-inch orbit to smooth surfaces. The steel-bodied tool weighs 1.3 lb and measures 5 3/4 inches long. It suits hobbyists and technicians doing occasional finish work.

0.20 hp motor and 8 cfm consumption

The 0.20 hp motor delivers an average flow of 2 cfm at the required 90 psi, with peak consumption of 8 cfm. This capacity handles light sanding on wood, metal or composite panels without bogging. It runs out of headroom on heavy stock removal or continuous production runs where higher torque and flow are needed.

1/4 in NPT inlet and 3/8 in hose minimum

The sander connects via a 1/4-inch NPT air inlet and needs a supply hose of at least 3/8-inch bore to maintain pressure. Rear exhaust directs air away from the workpiece. The non-vacuum design means dust extraction must be managed separately. It frees the user from electric cords but requires a compressor that can sustain 90 psi at the stated flow.

Highlights

  • Lightweight 1.3 lb design reduces operator fatigue
  • Random orbital motion with 3/16 in orbit delivers smooth finishes
  • 2 hp motor runs on 8 cfm at 90 psi
  • Palm grip and rear exhaust improve comfort and control
  • Adhesive-backed 6 in disc mount enables quick abrasive changes

Specifications

BrandSPEEDAIRE

Questions about this item

Will the 1/4 in NPT air inlet connect to the 3/8 in hose I already use?

Yes, the sander accepts a 1/4 in NPT inlet and the spec calls for a minimum 3/8 in hose, so your existing hose will work.

How can I confirm the sander is running at the specified 90 psi and 8 cfm after hooking it up?

Check the regulator on your compressor reads 90 psi at the tool and verify the compressor delivers at least 8 cfm while the sander runs under load.

Does the box include any abrasive discs or do I need to buy adhesive-backed discs separately?

Only the sander is listed in the data; adhesive-backed discs for the 6 in pad must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.