We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three-finger parallel pneumatic gripper in aluminium and steel, long-stroke design

SPEEDAIRE

SPEEDAIRE 3 Finger Parallel Long Stroke Gripper 118 LBF

SKU CH-JPWJ-0YA5J

Three-finger parallel gripper with 40 mm stroke, 80.5 mm open width and 118 LBF gripping force

  • Type3 Finger, Parallel, Long Stroke
  • Three-finger parallel design grips parts securely
  • 5 mm open width handles larger workpieces
  • 40 mm long stroke reaches deep features
  • 118 LBF force at 87 psi for strong hold
  • Aluminum body with carbon-steel fingers resists wear

What this gripper does

The SPEEDAIRE 3 Finger Parallel Long Stroke Gripper delivers 118 LBF of gripping force using compressed air. Its three fingers move in parallel across a 40 mm stroke, opening to 80.5 mm to handle a range of part sizes. The unit suits automated pick-and-place cells that need consistent, repeatable clamping without external power.

Sustained operation

Rated for continuous use between 14.5 psi and 87 psi, the gripper maintains steady force as long as supply pressure is stable. Aluminium body and carbon-steel fingers resist wear over long cycles, while the metric RC 1/8 in inlet simplifies plumbing in standard pneumatic manifolds. No electrical signals are required, so duty cycle is limited only by air supply capacity.

Thermals and air consumption

Operating temperature range spans 14 °F to 140 °F, allowing installation in unheated or warm factory zones. The compact 116 mm by 106 mm by 106 mm envelope fits tight machine envelopes without adding significant mass. Air consumption scales with cycle rate and pressure, producing minimal heat and near-silent operation compared with electric alternatives.

Highlights

  • Three-finger parallel design grips parts securely
  • 5 mm open width handles larger workpieces
  • 40 mm long stroke reaches deep features
  • 118 LBF force at 87 psi for strong hold
  • Aluminum body with carbon-steel fingers resists wear

Specifications

BrandSpeedaire
Type3 Finger, Parallel, Long Stroke

Questions about this item

How much compressed air does the 3-finger parallel gripper consume when running continuously at 87 psi?

The gripper operates between 14.5 and 87 psi with a 40 mm stroke; exact air consumption depends on cycle speed and supply pressure, so size your compressor to maintain 87 psi at the 1/8 in RC inlet during sustained operation.

What air supply fittings and pressure range must I already have to install this gripper?

You need a compressed-air line capable of 14.5–87 psi with a 1/8 in RC (BSPT) connection; the inlet accepts that thread directly, so no adapter is required if your supply matches.

Will the 80.5 mm open width and 106 mm body fit the same mounting pattern as my older 2-finger unit?

This model has an 80.5 mm open width, 106 mm overall width and height, and 116 mm length; compare those dimensions to your existing mount — the three-finger layout and longer stroke may require a new bracket or spacing shims.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.