We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal desiccant filter dryer with 1/2 inch NPT ports and bracket

SPEEDAIRE

SPEEDAIRE 2YNL2 Desiccant Filter/Dryer 30 CFM

SKU CH-CS3N-B790N

Removes moisture and particles down to .4 micron at 30 CFM with a 120 psi rating and -30 °F dew point

  • Delivers ISO Class 2 air purity with a -30 °F dew point
  • Five-stage filtration removes particles down to 0.4 micron
  • Handles 30 CFM at 100 psi for steady tool performance
  • Rated to 120 psi maximum operating pressure for demanding shop use
  • Includes metal bowl guard and bracket kit for secure, ready-to-mount installation

Desiccant Filter/Dryer for ISO Class 2 Air

The SPEEDAIRE 2YNL2 delivers ISO Class 2 compressed air with a maximum flow rate of 30 cfm. A five-stage system reduces the dew point to -30 Degrees F and filters particles down to .4 micron. Half-inch NPT inlet and outlet connections suit standard shop plumbing. The unit measures 16 7/8 in overall length and 3 in width for compact mounting.

Quiet Flow operation with 120 psi maximum pressure

Rated for a maximum operating pressure of 120 psi, the dryer maintains its 30 cfm capacity at 100 psi supply. Quiet Flow design keeps noise low during continuous use in woodworking or refrigerated dryer applications. The metal bowl holds 1.5 lb of desiccant and includes a guard for durability. No electrical power is required for the drying process.

Bracket kit and filter included for immediate

A bracket kit ships with the unit so it can be secured to a wall or compressor frame without extra hardware. The filter element is factory-installed, eliminating a separate purchase and reducing setup time. Metal bowl construction resists impact in busy workshops. Buyers who need higher flow or a different port size should select a larger model.

Highlights

  • Delivers ISO Class 2 air purity with a -30 °F dew point
  • Five-stage filtration removes particles down to 0.4 micron
  • Handles 30 CFM at 100 psi for steady tool performance
  • Rated to 120 psi maximum operating pressure for demanding shop use
  • Includes metal bowl guard and bracket kit for secure, ready-to-mount installation

Specifications

BrandSPEEDAIRE

Questions about this item

How do I install the 1/2 in NPT inlet and outlet on the SPEEDAIRE 2YNL2, and what step do people often miss?

Thread the 1/2 in NPT fittings with sealant, tighten to spec, then mount the included bracket kit so the 16 7/8 in body is supported — skipping the bracket lets vibration crack the connections.

What maintenance will the desiccant filter need later, and how much desiccant does it hold?

Replace the desiccant when the dew point rises above -30 Degrees F; the metal bowl holds 1.5 lb of media and the 0.4 micron filter element should be changed at the same time.

What limit appears first during continuous operation at 30 cfm?

The 120 psi maximum operating pressure is the hard ceiling — sustained flow at 100 psi is rated for 30 cfm, but pressure spikes beyond 120 psi will trip the safety relief.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.