We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black pistol-grip orbital sander with 3-inch pad

SPEEDAIRE

SPEEDAIRE 21AA95 air compressor, 3 in pad, 15000 rpm

SKU CH-YTEM-VHEMB

A 3-inch random-orbital air sander running at 15,000 rpm with a 0.3 hp motor and 11 cfm air consumption

  • 3 hp motor delivers power for light-duty sanding tasks
  • 15,000 rpm random orbital motion produces smooth finishes
  • 11 cfm air consumption matches common shop compressors
  • 9 lb pistol-grip design reduces operator fatigue
  • 1/4 in NPT inlet fits standard 3/8 in air hoses

SPEEDAIRE 21AA95 air orbital sander

The SPEEDAIRE 21AA95 is a new air-powered orbital sander built for light-duty surface preparation. It uses a 3-inch hook-and-loop pad driven by a random orbital motion to produce a swirl-free finish on wood, metal or composite panels. The pistol-grip design weighs 1.9 lb and measures 4 1/4 in long, making it easy to control during extended use. It operates at 15000 rpm for rapid material removal.

Hook-and-loop pad and non-vacuum exhaust

The 3-inch hook-and-loop abrasive mount lets you change discs in seconds without tools, reducing downtime between grits. Because the tool is a non-vacuum model, all exhaust air and dust exit through the rear port, so the work area stays clearer of debris when an external extraction system is not available. The 0.3 hp motor delivers an average flow rate of 2.8 cfm while consuming 11 cfm at the required 90 psi supply pressure.

Compressed-air supply requirements

The sander needs a 90 psi compressed-air source and a minimum 3/8 in hose to maintain the 11 cfm consumption without pressure drop. A 1/4 in NPT air inlet fitting is standard, so the tool connects directly to common shop couplers. Shops without a compressor capable of sustaining 11 cfm at 90 psi will see reduced speed and inconsistent finish quality. California Proposition 65 warnings apply for cancer and reproductive-harm chemicals.

Highlights

  • 3 hp motor delivers power for light-duty sanding tasks
  • 15,000 rpm random orbital motion produces smooth finishes
  • 11 cfm air consumption matches common shop compressors
  • 9 lb pistol-grip design reduces operator fatigue
  • 1/4 in NPT inlet fits standard 3/8 in air hoses

Specifications

BrandSPEEDAIRE

Questions about this item

How often should I service the 0.3 hp motor and hook-and-loop pad on this SPEEDAIRE 21AA95?

Lubricate the motor with a few drops of air-tool oil each day of use. Clean or replace the 3 in hook-and-loop pad when dust buildup weakens disc grip.

Will the 11 cfm air demand exceed my compressor on long sanding jobs?

The tool draws 11 cfm at 90 psi; sustained runs need a compressor that can deliver that flow continuously, otherwise pressure will drop and speed will fall below 15,000 rpm.

How much noise and heat does the rear exhaust produce during all-day use?

Rear exhaust directs sound and warm air away from the operator; the 1.9 lb housing stays cool enough for continuous grip, and average flow of 2.8 cfm limits heat buildup.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.