We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pistol-grip needle scaler, silver metal body, 28 needles included

SPEEDAIRE

SPEEDAIRE 12V730 Needle Scaler 10.0 CFM 2 3/64 in stroke

SKU CH-5KXF-PBXJ1

Pistol-grip needle scaler delivers 2,500 blows per minute with a 2 3/64 in stroke at 90 psi

  • Industrial-grade durability backed by ISO 15744 and ISO 8662-14 standards
  • Rapid surface preparation with 2,500 blows per minute
  • Consistent power delivery at 10.0 CFM full-load airflow
  • Ergonomic pistol-grip design reduces operator fatigue during extended use
  • Ready to work immediately with 28 needles included

10 CFM Needle Scaler

The SPEEDAIRE 12V730 is a pistol-grip needle scaler built for industrial-duty surface preparation. It delivers 10.0 CFM at full load and runs at 2,500 blows per minute to remove rust, scale and coatings quickly. The 2 3/64 inch stroke provides aggressive material removal on metal structures. This tool is not for operators who need a low-vibration finish sander.

90 PSI Air Supply Limit

The scaler requires a 90 psi supply and a minimum 3/8 inch hose to reach rated performance. Average consumption drops to 5.0 CFM during a 15 second run cycle, so undersized compressors will cause pressure sag and lost power. The 1/4 inch NPT inlet restricts maximum flow if adapted to larger fittings. This tool is not for shops limited to 3/8 inch supply lines or pressures below 90 psi.

28 Needles Included

The tool ships with 28 needles installed in a fixed-collar housing and uses a lever throttle for control. Overall length is 18 1/8 inches, so tight overhead clearances may limit access. ISO 15744 and ISO 8662-14 compliance confirms vibration and noise test standards. This tool is not for users who need a quick-change needle cartridge or a compact body for confined spaces.

Highlights

  • Industrial-grade durability backed by ISO 15744 and ISO 8662-14 standards
  • Rapid surface preparation with 2,500 blows per minute
  • Consistent power delivery at 10.0 CFM full-load airflow
  • Ergonomic pistol-grip design reduces operator fatigue during extended use
  • Ready to work immediately with 28 needles included

Specifications

BrandSPEEDAIRE

Questions about this item

Which SPEEDAIRE needle scaler model should I choose for heavy-duty industrial use?

The 12V730 model is rated for industrial duty with a 2 3/64 in stroke, 2,500 blows per minute, and 10.0 CFM at full load, making it suitable for demanding surface preparation tasks.

What does the 10.0 CFM rating mean when I'm actually using the tool?

At 90 psi operating pressure, the scaler draws 10.0 CFM under full load and averages 5.0 CFM over a 15-second run time, so your compressor must sustain that airflow for continuous operation.

What air fitting does the 1/4 in NPT inlet require, and what hose size is needed?

The tool has a 1/4 in NPT air inlet and requires a minimum 3/8 in hose to deliver the 10.0 CFM at 90 psi without excessive pressure drop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.