We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange pistol-grip air orbital sander with 3-inch hook-and-loop disc pad

SPEEDAIRE

SPEEDAIRE 10D237 Air Orbital Sander 3" Disc Pistol Grip

SKU CH-3WNA-TAR8K

A 3-inch air orbital sander with pistol grip, 0.5 hp motor and variable speed for light-duty finishing work

  • Random-orbital action reduces swirl marks with 1/8 in orbit diameter
  • Variable speed control matches finish needs from 0 to max RPM
  • 5 hp gearless motor delivers steady power with fewer wearing parts
  • 20 cfm air consumption at 90 psi suits standard shop compressors
  • Pistol grip design gives comfortable control for extended sanding sessions

3" Air Orbital Sander

The SPEEDAIRE 10D237 is a new air-powered random orbital sander with a three-inch disc diameter and pistol grip. It uses a gearless motor rated at 0.5 hp and a hook-and-loop abrasive mount for quick disc changes. Variable speed control allows the operator to adjust performance for light-duty sanding tasks. The tool requires a compressed air supply at 90 psi.

Suited for light finishing work

This sander fits operators who need a compact, non-vacuum tool for surface preparation on small areas. The 1/8 inch orbit diameter produces a fine random pattern suitable for finishing stages. Buyers who need integrated dust extraction or a larger pad for high material removal should look at alternative configurations. Heavy-duty continuous use exceeds the light-duty rating of this model.

Check air supply and fittings

Verify that your compressor can deliver 20 cfm at 90 psi through a hose with at least 3/8 inch internal diameter. The tool connects via a 1/4 inch NPT air inlet, so ensure the correct fitting is available. Confirm that 3-inch hook-and-loop discs with a 3/8 inch arbor hole match your abrasive stock. California Proposition 65 warnings apply to this product.

Highlights

  • Random-orbital action reduces swirl marks with 1/8 in orbit diameter
  • Variable speed control matches finish needs from 0 to max RPM
  • 5 hp gearless motor delivers steady power with fewer wearing parts
  • 20 cfm air consumption at 90 psi suits standard shop compressors
  • Pistol grip design gives comfortable control for extended sanding sessions

Specifications

BrandSPEEDAIRE

Questions about this item

What size air compressor and hose do I need to run the SPEEDAIRE 10D237 sander?

The sander requires 20 cfm at 90 psi with a minimum 3/8 in hose and a 1/4 in NPT air inlet.

Can I use my existing 3-inch hook-and-loop discs with this tool?

Yes, the 3-inch disc diameter and hook-and-loop mount accept standard 3-inch abrasive discs.

How do I know the random orbital motion is working correctly after connecting the air supply?

The disc should spin with a 1/8 in orbit diameter and variable speed control should respond smoothly across the range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.