We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbide down-cut router bit, 1/4 inch shank, silver finish

SPEED TIGER

SPEED TIGER ISED1-4-2 carbide down-cut router bit 1/4" pneumatic accessory

SKU CH-WWE5-65FA9 MPN ISED1-4-2

Carbide down-cut router bit with 1/4" diameter and 1" cutting length for wood, aluminium, MDF and steels up to HRC45

  • TypeEnd Mills
  • Size/Dimensions1/4 In
  • MaterialCarbide
  • Compatibility/FitmentISED
  • Selling Unit1
  • Down-cut geometry leaves a clean top surface on wood and MDF
  • Micro-grain carbide resists wear when cutting aluminium and carbon steel up to 225 HB
  • ISO-9001 factory grinding ensures consistent flute geometry for repeatable cuts
  • Single-flute design clears chips efficiently in plastics and non-ferrous metals
  • Hardened-steel capability up to 45 HRC extends tool life in tough alloys

SPEED TIGER Carbide Down-Cut Router Bit

The SPEED TIGER ISED1-4-2 is a 1/4" carbide end mill designed for general-purpose routing in wood, aluminium, copper, MDF and a range of steels. Its down-cut geometry pushes chips downward for a cleaner top surface. The cutter suits CNC operators and woodworkers who need a single tool for mixed-material jobs.

Materials and users it suits

Micro-grain carbide handles carbon steels around 225 Brinell, alloy steels between 225 and 325 Brinell, pre-hardened steels up to 45 HRC and hardened steels in the 40 to 45 HRC range plus cast iron. Buyers who need up-cut chip evacuation, compression spirals or larger diameters should look at other tool types.

Cutting capacity and headroom

The 1/4" cutting diameter and 1" cutting length give enough reach for typical pocketing and profiling passes. The 1/4" shank fits standard collets while the 2-1/2" overall length keeps the tool rigid. Very deep slots or high-volume production runs may exceed the flute length or wear life of this single flute geometry.

Highlights

  • Down-cut geometry leaves a clean top surface on wood and MDF
  • Micro-grain carbide resists wear when cutting aluminium and carbon steel up to 225 HB
  • ISO-9001 factory grinding ensures consistent flute geometry for repeatable cuts
  • Single-flute design clears chips efficiently in plastics and non-ferrous metals
  • Hardened-steel capability up to 45 HRC extends tool life in tough alloys

Specifications

BrandSpeed Tiger
ModelISED1-4-2
TypeEnd Mills
Size/Dimensions1/4 In
MaterialCarbide
Compatibility/FitmentISED
Selling Unit1

Questions about this item

What collet size does the 1/4" shank on this carbide bit require?

The 1/4" shank fits a standard 1/4" collet on your router or CNC spindle.

Can the down-cut geometry on this bit handle the same aluminium and MDF I already cut with up-cut tools?

Yes, the micro-grain carbide cuts aluminium, copper, MDF, wood and steels up to HRC45, but the down-cut action pushes chips downward instead of lifting them.

How do I verify the bit is performing correctly after setting spindle speed and feed rate?

Look for clean edges without tear-out on the top surface and consistent chip evacuation; contact the seller for cutting-condition data if results differ.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.