We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three copper desoldering braid spools in a storage box, widths 0.08, 0.1 and 0.12in

Solder Wick Braid with Flux 3 Sizes 10ft 0.08 0.1 0.12in

SKU CH-NTQ0-YS93K

Three spools of flux-coated copper braid, each 10 ft long in 0.08, 0.1 and 0.12 in widths, absorb excess solder on through-hole and surface-mount joints with minimal residue

  • Compatibility/FitmentSLJ-001, SLJ-001QL
  • Standards/CertificationsCopper
  • Three widths cover diverse joints
  • 10 ft per spool reduces restocking
  • Premium copper braid absorbs solder fast
  • Low-residue flux keeps boards clean
  • Sturdy box protects and organises spools

Three-Size Solder Wick Kit

This kit provides three spools of copper desoldering braid, each 10ft long, in widths of 0.08, 0.1 and 0.12in. It suits technicians and hobbyists who need a range of widths for different pad sizes and component pitches. The included storage box keeps spools organised and protected between uses.

Copper Braid Absorption Limits

The braid relies on capillary action to draw molten solder into the copper weave, so joint geometry and thermal mass determine how much solder a single pass can remove. Very large through-hole joints or heavy ground planes may exceed the practical capacity of the narrowest 0.08in width. Users working on high-mass assemblies should expect to use wider braid or multiple passes.

Width Selection Decides Fit

Choosing the correct braid width for the target pad or lead spacing is the single factor that determines whether this kit meets the job. The 0.08in spool fits fine-pitch surface-mount pads, while the 0.12in width handles larger through-hole terminals. Buyers who only ever work on one pitch may find the other sizes unnecessary.

Highlights

  • Three widths cover diverse joints
  • 10 ft per spool reduces restocking
  • Premium copper braid absorbs solder fast
  • Low-residue flux keeps boards clean
  • Sturdy box protects and organises spools

Specifications

Compatibility/FitmentSLJ-001, SLJ-001QL
Standards/CertificationsCopper

Questions about this item

Which width should I choose — 0.08in, 0.1in or 0.12in?

The 0.08in braid suits fine-pitch surface-mount pads, the 0.1in width handles standard through-holes and the 0.12in width clears larger joints and wire-pack pins.

How much solder can one 10ft spool actually absorb in practice?

Each 10ft spool provides enough copper braid for many desoldering sessions on typical circuit boards, with the no-clean flux leaving only minimal residue.

Is the copper braid compatible with lead-free solder temperatures?

Yes, the premium copper construction withstands the higher heat required for lead-free alloys while maintaining low-residue performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.