SOEWIOU
SOEWIOU 4-Pack 2-Channel 300 MHz 10-Dip Remote with Visor Clips
Four 300 MHz two-channel remotes with 10 dip switches compatible with Linear MCS412001, each with a visor clip and built-in 9V battery
- Weight0.88 pounds
- Control two doors with one 10-dip 300 MHz remote
- Operate from up to 120 feet away for quick access
- Four remotes and visor clips included for every vehicle
- Built-in 9 V dry battery supplies reliable power
- Compact 7.87 x 4.72 x 1.38 in design fits sun visor
Four Remotes for Multi-Door Control
This pack supplies four 300 MHz two-channel remotes built to work with Linear MCS412001 Multicode receivers that use 10 dip switches. Each unit arrives with a 9 V dry battery already installed and a sun-visor clip for vehicle mounting. The plastic grey housings measure 7.87 by 4.72 by 1.38 inches and weigh 14.08 ounces altogether.
Ideal for Households with Two Openers
Homeowners who operate two separate garage or gate receivers from the same car will appreciate the dual-button layout that controls both units at once. Buyers whose existing system uses a different frequency, a rolling-code protocol, or a dip-switch count other than 10 cannot use these remotes and should look for a model that matches their receiver specifications.
Simple Drop-In Addition to Existing System
No wiring or programming tools are required; the dip switches inside each remote are set to match the receiver and the remotes are ready to use. The 120-foot operating range lets drivers activate doors before reaching the driveway. Included visor clips keep the transmitters within reach without occupying console space.
Highlights
- Control two doors with one 10-dip 300 MHz remote
- Operate from up to 120 feet away for quick access
- Four remotes and visor clips included for every vehicle
- Built-in 9 V dry battery supplies reliable power
- Compact 7.87 x 4.72 x 1.38 in design fits sun visor
Specifications
| Brand | SOEWIOU |
|---|---|
| Weight | 0.88 pounds |
Questions about this item
What receiver models must I already have for these 10-dip 300 MHz remotes to work?
They are compatible with Linear MCS412001 Multicode receivers that use 10 dip switches at 300 MHz.
Can each remote control both my existing garage door and a second gate at the same time?
Yes, each 2-channel remote can simultaneously manage two distinct receiver devices such as two garage doors or one garage door and one electric door.
How do I verify the remotes are working correctly after programming the dip switches?
Test each button from inside the vehicle at up to 120 feet; both garage doors or gates should respond reliably when pressed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



