We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory toggle wall switch, rectangular thermoplastic body, modular back-wiring terminals

Snapconnect

Snapconnect 1203 3-Way Wall Switch 15A 120/277V Ivory

SKU CH-Z34V-PXC0Y

A three-way toggle switch rated 15 A at 120/277 V AC with modular wiring, automatic self-grounding and impact-resistant thermoplastic housing

  • 3-way control from two locations with 15 A 120/277 V AC rating
  • Modular wiring method speeds installation and reduces wiring errors
  • Automatic self-grounding staple maintains continuity to the wall box
  • Impact-resistant thermoplastic housing withstands industrial environments
  • UL Listed for safety compliance in commercial and residential use

Industrial 3-Way Toggle Switch

The Snapconnect 1203 is a single-pole 3-way toggle switch rated 15 A at 120/277 V AC for industrial and commercial lighting control. Its thermoplastic housing and impact-resistant construction suit demanding environments where reliable switching is required.

Modular Back-Wiring Capacity

Modular back-wiring accepts standard connectors for fast installation, while the automatic self-grounding staple maintains continuity to the metal wall box. The 2 hp horsepower rating covers typical motor loads, and the 15 A limit defines the maximum continuous current the contacts can carry.

Replaces Hard-Wired 3-Way Switches

This unit replaces conventional hard-wired 3-way switches where modular wiring and self-grounding speed up retrofit or new construction. The upgrade is worth it when project specifications call for UL-listed devices with back-wire termination and grounded mounting straps.

Highlights

  • 3-way control from two locations with 15 A 120/277 V AC rating
  • Modular wiring method speeds installation and reduces wiring errors
  • Automatic self-grounding staple maintains continuity to the wall box
  • Impact-resistant thermoplastic housing withstands industrial environments
  • UL Listed for safety compliance in commercial and residential use

Specifications

BrandHUBBELL

Questions about this item

Will the Snapconnect 1203 3-way switch fit the back-wiring terminals in my existing wall boxes?

The switch uses a modular back-wiring connection method, so it is designed to terminate conductors from the rear of the device.

How can I confirm the self-grounding feature is active after installation?

The automatic self-grounding staple makes continuity with the metal wall box when the switch is secured, grounding the device without a separate pigtail.

Does the Snapconnect 1203 come with the wall plate and mounting screws, or must I buy them separately?

The supplied data lists only the switch mechanism; a decorative wall plate and mounting screws are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.