We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown 25 ft cold water hose with brass quick-disconnect fittings

Simpson

Simpson 41113 Cold Water Hose 25 ft 3/8 in

SKU CH-QC4P-GBYDJ

A 25 ft cold-water hose with 3/8 in brass quick-disconnect fittings rated to 4,500 psi at 70 °F

  • Ready for high-pressure tasks with 4,500 psi rating
  • Quick-connect brass fittings speed up tool changes
  • 25 ft length gives ample reach for cold water jobs
  • Polyester tube and polyurethane cover resist wear
  • Compatible with 33M597, 33M598, 33M599, 33M601

25 ft Cold Water Hose

This Simpson 41113 hose delivers cold water at up to 4,500 psi through a 3/8 in bore. The 25 ft length uses polyester tube and polyurethane cover with brass quick-disconnect fittings on both ends. It arrives new and couples directly to compatible pressure-washer guns.

Suits pressure-washer owners needing 4,500 psi

Builders who require a longer reach or a different inside diameter should look elsewhere. The fixed 25 ft length and 3/8 in bore cannot be altered, and the hose is not rated for hot-water applications.

4,500 psi working pressure at 70 F

This single rating determines whether the hose matches the pump output. Exceeding it risks burst failure, while a lower-rated pump will not utilise the full capacity. Check the pump specification before fitting.

Highlights

  • Ready for high-pressure tasks with 4,500 psi rating
  • Quick-connect brass fittings speed up tool changes
  • 25 ft length gives ample reach for cold water jobs
  • Polyester tube and polyurethane cover resist wear
  • Compatible with 33M597, 33M598, 33M599, 33M601

Specifications

BrandSIMPSON

Questions about this item

When will the brass quick-disconnect fittings on this 25 ft hose need replacing?

The brass F and M quick-disconnect fittings are built for repeated coupling; replace them only if threads strip, seals leak or the locking collar no longer engages cleanly.

What pressure limit will be reached first during continuous spraying at 70 F?

The hose is rated for a maximum working pressure of 4,500 psi at 70 F; sustained use at or above that value risks burst failure.

Does the polyurethane cover get hot or stiff when the hose runs all day?

The polyurethane cover stays flexible in normal cold-water service and does not generate heat; only the water temperature inside affects handling comfort.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.