We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 100 ft hot water hose with brass quick-disconnect fittings

Simpson

Simpson 41096 Hot Water Hose 3/8 in 100 ft 4500 PSI

SKU CH-WFXP-HD9C3

A 100-foot, 3/8-inch hot-water hose rated to 4,500 PSI with brass quick-disconnect fittings on both ends

  • Handles demanding hot-water jobs with 4500 PSI rating
  • 100 ft length gives extended reach for large areas
  • Brass quick-disconnect fittings allow fast, secure connections
  • Polyurethane cover resists abrasion and weather exposure
  • Rated for 70 °F maximum working temperature

Simpson 41096 Hot Water Hose

The Simpson 41096 is a 100-foot coupled assembly built for hot-water pressure washing at up to 4500 psi. It uses a 3/8-inch inside diameter polyester tube with a gray polyurethane cover and brass quick-disconnect fittings on both ends. Rated for maximum working pressure at 70°F, it connects directly to compatible equipment.

Professionals needing long-reach hot-water delivery

This hose suits operators who need a single 100-foot run with factory-coupled brass F and M quick disconnects for hot water up to 4500 psi. It is not for users who require a different length, a different fitting type, or a hose rated for higher pressures than the stated working limit.

100-foot reach at 4500 psi

The 100-foot length and 3/8-inch bore deliver high-pressure hot water across a full job site without intermediate couplings. Headroom ends at the 4500 psi working pressure rating at 70°F; applications exceeding that pressure or requiring longer continuous runs will need a different specification.

Highlights

  • Handles demanding hot-water jobs with 4500 PSI rating
  • 100 ft length gives extended reach for large areas
  • Brass quick-disconnect fittings allow fast, secure connections
  • Polyurethane cover resists abrasion and weather exposure
  • Rated for 70 °F maximum working temperature

Specifications

BrandSIMPSON

Questions about this item

What pressure washer fittings must I already have to connect this 3/8 in hose?

The hose ends in a 3/8 in female quick-disconnect and a 3/8 in male quick-disconnect, both brass, so your pressure washer gun and pump outlet must accept those same 3/8 in quick-disconnect couplers.

Will this 4500 PSI hose work with my older Simpson 33M602 or 33M603 pressure washer?

Yes, the manufacturer lists the 33M602 and 33M603 as compatible models, so the hose is designed to connect directly to those units.

How can I confirm the hose is holding its rated 4500 PSI after I install it?

With the system running at normal operating temperature (around 70 °F), watch for leaks at the brass quick-disconnects and verify the pressure washer builds and maintains its usual cleaning force without pressure drop.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.