SIEVERT 3062-93 Adjustable Regulator Propane Single Stage CGA 510 welding

Adjustable Propane Regulator CGA 510

The SIEVERT 3062-93 is a single-stage adjustable regulator built for propane supply in general-purpose applications. It connects to a POL-type female inlet and delivers a male UNF outlet for compatible torch or hose assemblies. The brass and steel body with a flexible rubber diaphragm is rated for a maximum outlet pressure of 60 psig. This regulator suits technicians and fabricators who need a direct CGA 510 connection on propane cylinders.

Installation notes for POL inlet and UNF outlet

Thread the 0.885-14 POL inlet onto the cylinder valve by hand before final tightening with a suitable wrench to avoid cross-threading the female connection. The 9/16-18 UNF male outlet mates with standard propane hose fittings; verify thread engagement before pressurising. A common issue is leaking at the inlet if the POL seat is worn or debris is present, so inspect both faces each time the regulator is fitted. Do not exceed the 60 psig outlet limit or use with gases other than propane.

Maximum outlet pressure 60 psig decides suitability

The 60 psig maximum outlet pressure is the single figure that determines whether this regulator matches your torch or appliance requirements. If your equipment demands a higher delivery pressure, this model will not meet the need. Buyers who require a two-stage design for more stable pressure under varying cylinder conditions should look elsewhere. The CGA 510 designation confirms the inlet standard for propane service in this configuration.