We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Siemens Q230HID 30A two-pole plug-in breaker, grey toggle, compact frame

SIEMENS

SIEMENS Q230HID 30A 2 Pole 120/240V AC High Intensity Discharge circuit breaker

SKU CH-QP03-S92ZY

A 30 A, two-pole miniature breaker rated for 120/240 V AC high-intensity discharge loads with a 10 kA interrupting capacity

  • Designed for high-intensity discharge lighting with 30 A rating
  • Handles both 120 V and 240 V AC circuits in one unit
  • Two-pole configuration protects both legs of a single-phase supply
  • Plug-in mounting fits directly into compatible Siemens EQ load centres
  • Rated for 10 kA interrupting capacity at 120 V AC

Application & Fit

The Siemens Q230HID is a 30A two-pole miniature circuit breaker designed for high intensity discharge lighting circuits. It fits Siemens EQ load centers using a plug-in mounting style and protects single-phase 120/240V AC branch circuits up to 10kA interrupting rating.

Sustained Load Behaviour

The breaker carries a continuous 30A rating and provides a 48V DC voltage rating alongside the AC specification. Its high intensity discharge designation means it handles the inrush and steady-state demands of HID ballasts without nuisance tripping during extended operation.

Build & Connections

The frame size is 125A/QP with a toggle actuator for manual control. Terminal lugs accept copper conductors from 14 AWG up to 6 AWG. The plug-in mounting engages directly with compatible EQ series bus bars, securing the device without additional hardware.

Highlights

  • Designed for high-intensity discharge lighting with 30 A rating
  • Handles both 120 V and 240 V AC circuits in one unit
  • Two-pole configuration protects both legs of a single-phase supply
  • Plug-in mounting fits directly into compatible Siemens EQ load centres
  • Rated for 10 kA interrupting capacity at 120 V AC

Specifications

BrandSIEMENS

Questions about this item

How much heat or noise does the Q230HID produce when it carries 30 A continuously?

The breaker uses a toggle actuator and plug-in mounting; it has no fan or moving parts, so it runs silently and its temperature rise stays within the 10 kA AIR rating at 120 V AC.

What panelboard must I already own for this breaker to install?

It is designed for Siemens EQ load centers and fits the Q series frame size of 125 A.

Will the Q230HID coordinate with an older 125 A QP frame breaker already in the panel?

Both share the 125 A frame size and plug-in mounting, so they install side by side in the same EQ load center.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.