SIEMENS
SIEMENS 3SU1102-0AB50-1FA0 Illuminated Push Button Blue 1NO/1NC
Blue illuminated 22 mm push button with momentary flush action, 1NO/1NC contacts rated 10 A at 600 V AC and 5 A at 600 V DC, and IP66, IP67, IP69, IP69K sealing
- Momentary flush operation for responsive control
- Blue illuminated head gives clear visual status
- 1NO/1NC contacts switch up to 10 A at 600 V AC
- IP66, IP67, IP69 and IP69K sealing resists harsh environments
- NEMA 1, 12, 2, 3, 3R, 4, 4X ratings suit indoor and outdoor panels
Blue Illuminated Momentary Push Button
The SIEMENS 3SU1102-0AB50-1FA0 is a 22 mm flush-mounted illuminated push button with a blue plastic head and bezel. It provides momentary action for control panels and machine interfaces. The unit carries a 1NO/1NC contact configuration rated at 10A @ 600V AC and 5A @ 600V DC. NEMA A600/R300 designation confirms suitability for heavy-duty pilot duty.
Industrial Control Panels Needing Visual Status
This switch suits panels where operators need clear visual confirmation of circuit state in harsh environments. The IP66, IP67, IP69 and IP69K ratings protect against high-pressure wash-down and dust ingress. NEMA 1, 2, 3, 3R, 4, 4X and 12 enclosures are supported. Buyers requiring maintained-action switches or non-illuminated operators should consider other types.
10 Amp Contact Capacity With Screw Terminals
The single operator handles control-circuit loads up to 10 amps at 600 volts AC or 5 amps at 600 volts DC. Screw terminals accept standard wiring for secure connections. The momentary mechanism returns automatically when released, limiting use to momentary signalling or interlock tasks rather than continuous power switching.
Highlights
- Momentary flush operation for responsive control
- Blue illuminated head gives clear visual status
- 1NO/1NC contacts switch up to 10 A at 600 V AC
- IP66, IP67, IP69 and IP69K sealing resists harsh environments
- NEMA 1, 12, 2, 3, 3R, 4, 4X ratings suit indoor and outdoor panels
Specifications
| Brand | SIEMENS |
|---|
Questions about this item
What panel cut-out size is required for the 22 mm illuminated push button?
The operator needs a standard 22 mm panel cut-out for flush mounting.
Can the 1NO/1NC contacts switch a 600 V AC load rated at 10 A alongside legacy A600-rated starters?
Yes, the contacts carry a NEMA A600 rating at 10 A / 600 V AC and R300 at 5 A / 600 V DC.
How do I verify the blue LED illumination is functioning after wiring the screw terminals?
Apply control voltage; the blue flush head lights immediately and the momentary action returns on release.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



