We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red cylindrical photoelectric switch with M12 connector, 65.5 mm long

Sick

Sick VT12T-2P410 Photoelectric Switch PNP

SKU CH-38PG-QQNKV

A photoelectric proximity sensor with PNP output, 2–100 mm sensing range, infrared LED, M12 connector and IP67 housing

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • PNP output simplifies wiring for positive-switching loads
  • 115 mm sensing range detects objects at short distances
  • IP67 enclosure resists dust and water ingress
  • 400 Hz switching frequency supports rapid detection cycles
  • Single teach-in button enables quick range adjustment

Sick VT12T-2P410 Photoelectric Switch

The Sick VT12T-2P410 is a cylindrical photoelectric proximity sensor with an M12 x 1 thread and a 65.5 mm housing length. It uses an energetic detection principle with an infrared LED light source at 880 nm wavelength. The unit provides a PNP switching output with selectable light or dark switching modes. It is supplied new in a single pack box.

Practical limits of the sensing range and supply

The sensor offers a maximum sensing range of 0 mm to 115 mm with a defined sensing range of 2 mm to 100 mm. The light spot reaches approximately 20 mm diameter at 100 mm distance with an 11.4° dispersion angle. Operation requires a 10 V DC to 30 V DC supply voltage with a maximum 10% ripple. The switching frequency is 400 Hz with a 1.25 ms response time and a maximum output current of 100 mA.

Compatibility checks for your installation

Verify that your control system accepts a PNP output with a male M12 4-pin connector. Ensure the mounting location accommodates the cylindrical metal housing with nickel-plated brass and PA construction. Confirm the operating environment stays within the –25 °C to +70 °C ambient temperature range. The IP67 enclosure rating suits wet or dusty conditions but check that the PMMA optics material resists any specific chemicals present.

Highlights

  • PNP output simplifies wiring for positive-switching loads
  • 115 mm sensing range detects objects at short distances
  • IP67 enclosure resists dust and water ingress
  • 400 Hz switching frequency supports rapid detection cycles
  • Single teach-in button enables quick range adjustment

Specifications

BrandSick
ModelSICK VT12T-2P410
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

What sensing range should I expect from the VT12T-2P410 in my setup?

The sensor detects objects from 2 mm to 100 mm using its energetic photoelectric principle with infrared LED at 880 nm.

How fast can the PNP output switch in a real machine?

The switching frequency reaches 400 Hz with a 1.25 ms response time, and the output handles up to 100 mA.

What does the M12 4-pin connector cap in practice?

The male M12 connector carries 10–30 V DC supply, PNP switching output, and the teach/control input on a single 4-pin interface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.