Sick
Sick RZN1-05ZRS-KU0 C-slot cylinder sensor
A magnetic cylinder sensor fits C-slot and other profiles, switches via reed contact at up to 500 Hz, and operates from –25 °C to +75 °C with IP67 protection
- Works with C-slot and six other cylinder types
- Reed switch actuates at 500 Hz for fast response
- IP67 enclosure resists dust and water ingress
- Operates from –25 °C to +75 °C in harsh environments
- 2 m PUR cable with 3-wire AC/DC connection
C-slot cylinder sensor
The Sick RZN1-05ZRS-KU0 is a magnetic position sensor designed for C-slot pneumatic cylinders. It also fits profile, tie-rod, round-body, dovetail-groove and SMC rail cylinders when used with appropriate adapters. The 25 mm plastic housing mounts directly on the cylinder to detect piston position in automation systems.
10 to 30 V AC/DC supply with Reed output
The sensor operates on a 10 V to 30 V AC/DC supply and provides a normally-open Reed switching output rated at 500 mA continuous current. Switching frequency reaches 500 Hz with a switching capacity of 10 W. The 2 m PUR cable carries three 0.09 mm2 conductors for simple AC/DC 3-wire connection.
IP67 enclosure for harsh environments
The IP67-rated housing resists dust ingress and temporary immersion, while the PA12 body withstands shock at 30 g for 11 ms and vibration from 10 Hz to 55 Hz at 1 mm amplitude. Operating temperature spans -25 °C to +75 °C. EMC compliance follows EN 60947-5-2 and UL file NRKH.E181493 is listed.
Highlights
- Works with C-slot and six other cylinder types
- Reed switch actuates at 500 Hz for fast response
- IP67 enclosure resists dust and water ingress
- Operates from –25 °C to +75 °C in harsh environments
- 2 m PUR cable with 3-wire AC/DC connection
Specifications
| Brand | Sick |
|---|---|
| Model | SICK RZN1-05ZRS-KU0 |
Questions about this item
Which cylinder type matches my application?
This sensor fits C-slot cylinders directly and works with profile, tie-rod, round-body, dovetail-groove, SMC ECDQ2 and CDQ2 rails using the appropriate adapter.
What does the 500 Hz switching frequency mean in daily use?
The reed contact can change state up to five hundred times per second, allowing reliable detection on fast pneumatic cycles.
How does the 10 V to 30 V AC/DC supply range affect installation?
The three-wire cable connects to any 10–30 V AC or DC source, drawing up to 500 mA continuous current with a 10 W switching capacity limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



