We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue mini electric screwdriver with 29-piece kit in portable case

Sharden Mini Electric Screwdriver 29 in 1 Blue SD018-Blue

SKU CH-KP4K-6YEEJ

A 29-piece precision kit with 24 bits, a 350 mAh USB-C rechargeable driver delivering 0.15–0.35 Nm at 200 rpm for 500 screws per charge, plus LED lighting and magnetizer in a portable case

  • Size/Dimensions6
  • Color/FinishBlue
  • Item Count29, 1, Count
  • Selling UnitSD018-Blue, Mini Electric Screwdriver
  • Hole Size Nominal4MM Precision
  • Capacity1 Count
  • Dual torque settings of .15 and .35 Nm for precise control
  • 24 precision bits cover Phillips, Torx, Hex and more
  • 350 mAh battery drives up to 500 screws per charge
  • USB-C recharge reaches full capacity in under one hour
  • Three built-in LEDs illuminate screw holes in low light

Precision Repair Toolkit

The Sharden Mini Electric Screwdriver SD018-Blue is a compact 29-piece kit built for precision electronics work. It includes 24 assorted bits covering Phillips, Torx, Flat Head, Triwing, Hex, Pentalobe, Triangle and U-Type profiles plus a magnetizer and opening picks. The set targets hobbyists and technicians servicing smartphones, laptops, watches, cameras and similar small devices.

Simple Setup And Use

All components store in a portable case so the kit is ready whenever you open it. A USB-C port recharges the internal 350mAh battery in under an hour. Three integrated LEDs illuminate screw holes in dim conditions. Long-pressing the LED button toggles between 0.15 Nm and 0.35 Nm torque settings; the tool also accepts up to 7 Nm of manual force for stubborn fasteners.

Capacity And Limits

The motor spins at 200 rpm and can drive roughly 500 screws per full charge. The two electric torque levels handle delicate assembly and disassembly on phones, tablets, eyewear and precision instruments. Tasks requiring higher torque, larger fasteners or continuous heavy-duty use fall outside the design envelope. The 4 mm bit holder restricts compatibility to the supplied precision bits.

Highlights

  • Dual torque settings of .15 and .35 Nm for precise control
  • 24 precision bits cover Phillips, Torx, Hex and more
  • 350 mAh battery drives up to 500 screws per charge
  • USB-C recharge reaches full capacity in under one hour
  • Three built-in LEDs illuminate screw holes in low light

Specifications

BrandSharden
ModelMini Electric Screwdriver
Size/Dimensions6
Color/FinishBlue
Item Count29, 1, Count
Selling UnitSD018-Blue, Mini Electric Screwdriver
Hole Size Nominal4MM Precision
Capacity1 Count
Number of Pins9
Part NumberSD018-Blue

Questions about this item

How can I confirm the screwdriver is running at the correct speed after I start it?

The motor runs at 200 rotations per minute; listen for a steady whine without stalling when driving a screw.

Which bits and accessories are included in the 29-piece kit and what must I supply myself?

The case holds 24 precision bits (Phillips, Torx, Flat, Triwing, Hex, Pentalobe, Triangle, U-Type), a magnetizer, opening picks and the screwdriver itself; only a USB-C power source is needed for charging.

Should I choose the low or high torque setting for smartphone repair?

Use the 0.15 Nm low-torque setting for delicate phone internals; switch to 0.35 Nm for slightly larger fasteners.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.