We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stiff carbon-steel scraper, 59 in fiberglass handle with soft grip and retroreflective tape

Seymour

Seymour 49756 Scraper, Stiff, 59 in, Carbon Steel

SKU CH-6FN9-HB41T

Stiff carbon-steel scraper with a 59 in fiberglass handle and soft grip

  • Stiff carbon-steel blade resists bending during heavy scraping
  • Full-tang construction transfers force directly from handle to edge
  • 59 in overall length gives extended reach without a ladder
  • Fiberglass handle with soft grip reduces vibration and fatigue
  • Retroreflective tape on blade improves visibility in low light

Stiff Carbon-Steel Scraper

The Seymour 49756 is a stiff-bladed scraper built for heavy-duty removal of paint, adhesives and floor coverings. Its straight carbon-steel edge measures 6 1/8 inches long and 6 7/8 inches wide, and the full-tang construction runs the entire 59-inch overall length. The tool is intended for trade professionals and serious DIYers who need maximum leverage on large, flat surfaces.

Blade Geometry Limits

The straight, non-replaceable blade cannot be sharpened in the field and will eventually dull on abrasive substrates such as concrete or ceramic tile. Because the edge is fixed and non-retractable, the scraper is unsuitable for delicate finish work or confined spaces where a flexible or guarded blade would prevent gouging. Users must accept that the blade profile dictures the tool’s effective life.

Installation and Common Issues

No assembly is required — the fiberglass handle with soft grip is permanently bonded to the blade tang. The most frequent problem is handle flex under extreme prying loads, which can reduce edge control on stubborn material. Retroreflective tape on the handle aids visibility in low light, but the tape can peel after prolonged solvent exposure.

Highlights

  • Stiff carbon-steel blade resists bending during heavy scraping
  • Full-tang construction transfers force directly from handle to edge
  • 59 in overall length gives extended reach without a ladder
  • Fiberglass handle with soft grip reduces vibration and fatigue
  • Retroreflective tape on blade improves visibility in low light

Specifications

BrandSTRUCTRON

Questions about this item

Should I pick the 59 in scraper or a shorter length for tight spaces?

The 59 in overall length gives extended reach for floor or wall work; a shorter tool would reduce leverage and standing comfort.

How does the stiff 6 1/8 in carbon steel blade perform on hardened adhesive?

The stiff straight blade resists flex so it transmits full force into tough coatings, and carbon steel holds a sharp edge for aggressive scraping.

Does the fiberglass handle with soft grip meet any industrial handle standard?

The 4 1/4 ft fiberglass handle with soft grip and full tang provides non-conductive strength and vibration damping for heavy use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.