We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron pillow block bearing with double-sealed radial ball insert 1-15/16 inch bore

Sealmaster

Sealmaster MP-31 Pillow Block Bearing 1-15/16" Bore

SKU CH-NNX5-AQV0D

A cast-iron pillow block bearing with a 1-15/16" cylindrical bore and double-sealed radial ball insert for bolt-through mounting

  • TypeTarps
  • Supports heavy radial loads with 1-15/16 in cylindrical bore
  • Cast iron housing withstands shock and vibration in mounting
  • Double-sealed closure keeps contaminants out of bearing race
  • Operates reliably from -20 to 220 Degrees F
  • Two bolt-through holes on 7 35/64 in centres simplify installation

Sealmaster MP-31 Pillow Block Bearing

This Sealmaster MP-31 pillow block bearing uses a 1-15/16 in cylindrical bore to mount on shafts in industrial machinery. The cast iron housing holds a radial ball insert made from alloy steel. It suits maintenance teams replacing worn units on conveyors, fans or agricultural equipment where a two-bolt footprint is required.

Operating limits of the bearing insert

The double-sealed radial ball insert comes lubricated with an NLGI #2 equivalent grease. It is rated for continuous operation between -20 °F and 220 °F. Exceeding this temperature range or exposing the seals to aggressive chemicals can reduce service life.

Verify shaft and mounting dimensions before ordering

Confirm the shaft diameter matches the 1-15/16 in bore and that the mounting surface accepts a 7 35/64 in bolt-hole centre distance with two holes. The base measures 2.88 in wide and the overall height is 5.093 in. This unit is not for applications needing a four-bolt base or a different bore size.

Highlights

  • Supports heavy radial loads with 1-15/16 in cylindrical bore
  • Cast iron housing withstands shock and vibration in mounting
  • Double-sealed closure keeps contaminants out of bearing race
  • Operates reliably from -20 to 220 Degrees F
  • Two bolt-through holes on 7 35/64 in centres simplify installation

Specifications

BrandSEALMASTER
TypeTarps

Questions about this item

How do I decide between the listed versions or capacities for the Sealmaster MP-31 pillow block bearing?

This listing covers a single 1-15/16 in bore size with a 2.88 in base width and 5.093 in overall height. If your shaft matches that bore and the two-bolt 7 35/64 in mounting pattern fits, this is the correct version.

What does the 220 °F maximum temperature mean for real-world operation of this bearing?

The alloy-steel radial ball insert with NGLI #2 equivalent grease is rated to 220 °F continuous. In a running machine, keep the housing surface well below that limit; sustained higher heat will degrade the lubricant and shorten seal life.

How does the bolt-through mount and double-sealed closure cap the bearing's speed and contamination resistance?

The two-bolt through-mount on a 7 35/64 in center pattern locks the cast-iron housing rigidly, while the double-sealed closure keeps out dust and moisture. Speed is limited by the grease fill and seal drag rather than the mounting style.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.