We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink vinyl electrical tape roll on a core, 3/4 inch wide, 66 feet long, 7.0 mil thick

Scotch

Scotch 35 Electrical Tape Pink 3/4 in x 66 ft 7.0 mil

SKU CH-7BFV-1MA7M

Vinyl-backed electrical tape rated to 600 V, 7.0 mil thick, 66 ft long, operating from 30 °F to 220 °F with 20 lb-in tensile strength and 17 oz/in adhesion

  • TypeLong
  • Reliable insulation up to 600 volts with UL 510 listing
  • Flexible vinyl backing stretches 225 percent for tight wraps
  • Rubber-resin adhesive holds at 17 oz/in across 30 °F to 220 °F
  • 0 mil thickness delivers 20 lb-in tensile strength for durability
  • Distinct pink colour on a 66 ft roll aids quick circuit identification

Series 35 vinyl tape for general wiring

This roll is a 3/4 in by 66 ft continuous length of pink vinyl electrical tape with a rubber resin adhesive. It is rated for 600 volts maximum and carries CSA certification, UL 510 listing and RoHS 2011/65/EC compliance. The tape suits electricians and DIYers insulating wire splices, identifying circuits or bundling cables in residential and light commercial work. It is not intended for applications that demand UV resistance or performance below 30 degrees F.

Thermal range and adhesive behaviour

The tape operates continuously between 30 and 220 degrees F without losing adhesion or mechanical integrity. Rubber resin adhesive provides 17 oz/in peel strength on typical conductor insulation and jacketing materials. At 7.0 mil thickness the backing adds minimal bulk inside crowded boxes while delivering 20 lb-in tensile strength and 225 percent elongation for stretch-wrapping irregular shapes. No thermal derating data beyond the stated limits is supplied.

Handling, core size and daily use

A 1 1/4 in core diameter fits standard electrician pouches and bench dispensers. Vinyl backing tears cleanly by hand yet resists abrasion when pulled through conduit or around sharp edges. Pink colour allows quick visual identification of specific circuits or phases during maintenance. The roll lacks UV resistance so extended outdoor exposure should be avoided. Core size and roll length support frequent use without constant replacement.

Highlights

  • Reliable insulation up to 600 volts with UL 510 listing
  • Flexible vinyl backing stretches 225 percent for tight wraps
  • Rubber-resin adhesive holds at 17 oz/in across 30 °F to 220 °F
  • 0 mil thickness delivers 20 lb-in tensile strength for durability
  • Distinct pink colour on a 66 ft roll aids quick circuit identification

Specifications

BrandSCOTCH
TypeLong

Questions about this item

How do I apply the 3/4 in wide vinyl-backed tape so the rubber-resin adhesive bonds properly?

Clean the wire surface, stretch the tape as you wrap so the 7.0 mil PVC backing conforms, and maintain at least a half-lap overlap; the common mistake is not stretching enough, which leaves gaps that reduce the 17 oz/in adhesion.

When will the pink Series 35 roll need replacing due to adhesive breakdown?

The rubber-resin adhesive stays within its 30 to 220 °F performance range for years; replace the roll if the tape becomes brittle, loses stretch, or no longer holds the rated 20 lb-in tensile strength.

What sustained condition hits the 600 V insulation limit first during continuous loading?

Conductor temperature approaching the 220 °F maximum will degrade the PVC backing before the 600 V dielectric rating is exceeded, so monitor heat rather than voltage alone.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.