We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric ZBV6 22 mm incandescent lamp module, white plastic body with screw terminals

Schneider Electric

Schneider Electric ZBV6 22 mm 250 V AC/DC Incandescent Lamp Module

SKU CH-GTFJ-2HZKD

22 mm incandescent lamp module rated 240 V AC/DC with screw-clamp terminals for XB4/5 illuminated operators

  • TypeIndustrial Electrical Controls & Automation
  • Size22 mm
  • 240 V AC/DC operation fits standard industrial control circuits
  • 22 mm diameter matches common panel cut-outs for illuminated operators
  • Screw-clamp terminals give secure wiring without special tools
  • NEMA 1, 2, 3, 4, 4X, 12, 13 ratings suit harsh indoor and outdoor environments
  • Complies with UL 508, CSA C22.2 No. 14 and IEC 60947 standards for global acceptance

22 mm Incandescent Lamp Module

This 22 mm incandescent lamp module operates at 240 V AC/DC and is built for Schneider Electric XB4 and XB5 illuminated operators and pilot lights. It uses a full-voltage design with screw-clamp terminals for secure wiring. The unit carries NEMA 1, 2, 3, 4, 4X, 12 and 13 ratings and meets CSA C22.2 No. 14, UL 508 and IEC 60947 standards.

Replaces worn indicator lamps in control panels

The module serves as a direct replacement for failed incandescent lamps in existing XB4 or XB5 push-button stations and pilot lights. Swapping the lamp restores visual status indication without rewiring the operator. The upgrade is worth it when the original lamp has burned out or when a panel requires a consistent 240 V AC/DC supply across all indicators.

Verify operator series and voltage before ordering

Confirm that the host device is an XB4 or XB5 illuminated operator rated for 240 V AC/DC. Check that the mounting hole matches the 22 mm diameter and that the panel cut-out meets the NEMA enclosure rating required by the installation. Ensure the control circuit can supply the full voltage the lamp module expects.

Highlights

  • 240 V AC/DC operation fits standard industrial control circuits
  • 22 mm diameter matches common panel cut-outs for illuminated operators
  • Screw-clamp terminals give secure wiring without special tools
  • NEMA 1, 2, 3, 4, 4X, 12, 13 ratings suit harsh indoor and outdoor environments
  • Complies with UL 508, CSA C22.2 No. 14 and IEC 60947 standards for global acceptance

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
Size22 mm

Questions about this item

What panel cut-out size does the 22 mm lamp module require?

The module fits a standard 22 mm panel cut-out used with XB4 and XB5 illuminated operators and pilot lights.

How do you wire the screw-clamp terminals, and what mistake should be avoided?

Strip the conductor, insert it into the screw clamp and tighten securely; the common error is leaving strands loose or under-torquing the screw.

When should the incandescent lamp be replaced, and what voltage rating must the new lamp match?

Replace the lamp when it no longer illuminates; the replacement must be rated for 240 V AC/DC to match the module’s full-voltage design.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.