We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic flush push button, 22 mm diameter, momentary action, IP66 rated

Schneider Electric

Schneider Electric ZB5AW313 22 mm Flush Momentary Push Button

SKU CH-QBDG-FJGS5

A 22 mm flush momentary push button with IP66 and NEMA 4X ratings for industrial control panels

  • TypeIndustrial Electrical Controls & Automation
  • Size22 mm
  • Flush 22 mm cut-out fits standard panels
  • Momentary action returns automatically after press
  • IP66 and NEMA 4X 13 sealing resists water and dust
  • Plastic head and bezel withstand industrial environments
  • Certified to IEC 60947, UL 508, CSA 22.2 No. 14 and DNV standards

22 mm Flush Push Button for Industrial Panels

The Schneider Electric ZB5AW313 is a white momentary push button designed for 22 mm panel cut-outs. Its flush plastic head and bezel suit control stations and machinery interfaces where a low-profile actuator is required. The operator is sold as a new component for integration into custom panels or replacement of worn switches.

IP66 and NEMA 13 4X Environmental Protection

The button meets IP66 for dust-tight and powerful-water-jet resistance and carries NEMA 13 and 4X ratings for indoor and outdoor use. Plastic construction eliminates corrosion risk in wash-down or humid environments. Compliance with IEC 60529 and IEC 60068 vibration and shock standards confirms durability under continuous industrial operation.

Momentary Action with Class II Insulation

The switch provides momentary contact only, returning to the open position when released, so it cannot latch a circuit in the on state. Class II insulation to IEC 60536 removes the need for protective earthing of the operator itself. Buyers who need a maintained or latching function must select a different operator type.

Highlights

  • Flush 22 mm cut-out fits standard panels
  • Momentary action returns automatically after press
  • IP66 and NEMA 4X 13 sealing resists water and dust
  • Plastic head and bezel withstand industrial environments
  • Certified to IEC 60947, UL 508, CSA 22.2 No. 14 and DNV standards

Specifications

BrandSCHNEIDER ELECTRIC
TypeIndustrial Electrical Controls & Automation
Size22 mm

Questions about this item

How do I install the 22 mm flush push button and which step is often missed?

Mount the operator through a 22 mm panel cut-out, secure the locking nut to the specified torque, then clip the contact block onto the rear latch until it clicks — the click is the step installers skip.

What maintenance or replacement will the ZB5AW313 need over time?

The plastic head and bezel resist IP66 ingress; inspect the seal annually and replace the operator if the white button cracks or the momentary action feels soft.

What limit appears first during sustained use of this NEMA 13, 4X and IP66 button?

Mechanical endurance of the momentary mechanism is the first limit; the plastic operator is rated for standard industrial cycles, not continuous high-frequency actuation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.