Schneider Electric
Schneider Electric XB4BL734155 Non-Illum Multi Push Contact, 2 Head, 1NO/1NC
Two-head flush push-button station with green and red I/O legends, 10 A 600 V AC contacts, IP66/IP69K and NEMA 13/4X metal housing
- Two-head operator saves panel space with dual flush buttons
- I/O legend and green/red colours give instant status recognition
- 10 A at 600 V AC rating handles demanding control circuits
- IP 66 and IP 69K sealing resists wash-down and high-pressure jets
- NEMA 13 and 4X rating protects against oil, coolant and corrosion
Two-Head Emergency Stop Operator
The Schneider Electric XB4BL734155 is a 22 mm rectangular multi-head push-button with one green flush button and one red flush button. Each head carries a single normally-open and normally-closed contact rated at 10 A and 600 V AC. The metal head meets NEMA 13 and 4X as well as IP 66 and 69K for wash-down environments.
Panel Builders Needing I/O Marked Dual Control
This unit suits control panels that require a clearly marked start-stop pair in a single 22 mm cut-out. The momentary action and included I/O legends simplify wiring and operator training. Applications demanding maintained positions, illuminated heads, additional contact blocks or a different colour scheme will need a different operator.
10 A 600 V AC Contact Rating Decides Fit
The 1NO/1NC contact block is rated for 10 amperes at 600 volts AC, which determines whether the switch can directly drive your contactors, relays or pilot lights. Verify your circuit current and voltage against this rating before specifying the part.
Highlights
- Two-head operator saves panel space with dual flush buttons
- I/O legend and green/red colours give instant status recognition
- 10 A at 600 V AC rating handles demanding control circuits
- IP 66 and IP 69K sealing resists wash-down and high-pressure jets
- NEMA 13 and 4X rating protects against oil, coolant and corrosion
Specifications
| Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
How often will the 1NO/1NC contact blocks need replacement under normal use?
The 1NO/1NC contacts are rated for 10A at 600V AC and momentary action; replacement depends on cycle count and load, not a fixed schedule.
What is the first limit reached during continuous operation — thermal or mechanical?
The IP 66 and 69K sealing and NEMA 13, 4X enclosure protect against ingress; thermal limits of the 10A contact rating typically appear before mechanical wear.
Does the metal head get hot or draw extra power when the push buttons are held all day?
Momentary action means the contacts only draw power while pressed; the metal head and 22 mm body stay at ambient temperature during normal intermittent use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



