We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow plastic pendant control box with two push buttons and half-inch conduit hub

Schneider Electric

Schneider Electric XACA205 Yellow Pendant Control Station

SKU CH-78VV-Q3A35

Yellow two-button pendant station with momentary push buttons, mechanical interlock, IP65-rated plastic enclosure and 10 A, 600 V contacts

  • TypeIndustrial Electrical Controls & Automation
  • Two-momentary push buttons with mechanical interlock
  • 10 A contact rating at 600 V AC/DC
  • NEMA 4/4X and IP65 enclosure protection
  • Yellow plastic housing with 1/2 in. NPT hub
  • CSA and UL listed for industrial safety

Schneider Electric XACA205 Pendant Station

The Schneider Electric XACA205 is a yellow pendant control station built for industrial electrical automation. It provides two push-button operators with momentary action for direct equipment control. The unit carries NEMA 4, 4X and IP65 ratings plus CSA and UL listing for demanding environments.

Check hub size and contact rating before ordering

Verify that the 1/2 in.-14 NPT hub matches your conduit entry and that the 10 A, 600 V AC/DC contact rating suits the load. The station uses 1 NO/1 NC contacts with mechanical interlock and is restricted from sale in certain states.

Sealed enclosure handles dust and wash-down

The plastic IP65 enclosure resists water jets and dust ingress without active cooling, so it runs silently and draws no power of its own. Heat dissipation is passive through the yellow plastic housing during normal push-button operation.

Highlights

  • Two-momentary push buttons with mechanical interlock
  • 10 A contact rating at 600 V AC/DC
  • NEMA 4/4X and IP65 enclosure protection
  • Yellow plastic housing with 1/2 in. NPT hub
  • CSA and UL listed for industrial safety

Specifications

BrandSchneider Electric
TypeIndustrial Electrical Controls & Automation

Questions about this item

Does the XACA205 pendant station include mounting hardware or a connecting cable in the box?

The station is supplied as a complete enclosure with two push-button operators and internal contact blocks. Mounting hardware and cable are not included and must be sourced separately.

Which contact configuration should I choose for a standard up/down motor circuit?

The unit provides one normally-open and one normally-closed contact per operator, giving a 1NO/1NC arrangement on both the up and down buttons for direct motor control.

What does the 10 A 600 V contact rating mean when wiring a hoist motor?

Each contact block can switch up to 10 amps at 600 volts AC or DC, matching the A600/Q600 designation for heavy-duty industrial motor circuits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.