Schneider Electric
Schneider Electric NSYTRV62 Pass-Through Terminal Block 1 Pole 50 A 1000 V
A pass-through terminal block for DIN-rail mounting, accepting 24–8 AWG copper wire at 50 A and 1,000 V with screw-clamp connections
- Engine BrandSCHNEIDER ELECTRIC
- Pass-through design enables quick circuit bridging
- 50 A current rating handles demanding industrial loads
- 1000 V maximum voltage suits high-voltage applications
- Screw-clamp connection accepts 24–8 AWG solid or stranded copper
- DIN-rail mount with 0.32 in width saves panel space
Single-Pole Pass-Through Block
The Schneider Electric NSYTRV62 is a DIN-rail terminal block rated for 50 A and 1000 V. It accepts solid or stranded copper wire from 24 AWG up to 8 AWG using screw-clamp connections. The grey, two-tier housing measures 1.88 in deep, 1.88 in long and 0.32 in wide, making it suitable for compact control-panel layouts. Certified to ATEX, CSA, CURus, DNV, GL, IECEx, LR, UL and VDE standards.
50 A Current Rating Decides Fit
The 50 A rating is the single figure that determines whether this block matches your circuit. Conductors must be copper and fall between 24 AWG and 8 AWG; exceeding either limit voids the rating. No circuit-protection function is built in, so over-current devices must be provided elsewhere in the panel.
DIN-Rail Mount Frees Panel Space
The block snaps onto standard DIN rail, leaving the panel surface clear for other components. Screw-clamp terminals speed wiring without specialised tools. The pass-through design carries the conductor straight through both tiers, simplifying loop-through connections. Installers needing multi-pole or fused variants must select different part numbers.
Highlights
- Pass-through design enables quick circuit bridging
- 50 A current rating handles demanding industrial loads
- 1000 V maximum voltage suits high-voltage applications
- Screw-clamp connection accepts 24–8 AWG solid or stranded copper
- DIN-rail mount with 0.32 in width saves panel space
Specifications
| Engine Brand | SCHNEIDER ELECTRIC |
|---|
Questions about this item
What does the 50 A rating mean when the block is wired in a panel?
The 50 A rating is the maximum continuous current the screw-clamp connection can carry for copper conductors between 24 AWG and 8 AWG.
Which connection standard does the screw-clamp terminal follow and what voltage does it limit?
The terminal uses a screw-clamp connection rated for up to 1,000 V maximum voltage.
What does the block need to mount securely in an enclosure?
It mounts on DIN rail and measures 1.88 in deep, 1.88 in long and 0.32 in wide.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00212739BTC
In stock